Conversion from Pebioctets per second to Tebibits per second

Information about the Pebioctet per second (Pio/s)

The pebioctet per second is a unit of data transfer rate equal to 1,024 tebioctets per second, or two to the fiftieth power octets per second. Its symbol is Pio/s. It is the binary counterpart of the petaoctet per second, and the two differ by 12.6 per cent.

The rate exists only as a total. The aggregate memory bandwidth of a whole supercomputer, or the summed capacity of the network fabric joining its cabinets, reaches this range, and both are sums over tens of thousands of components, each of which moves a few hundred gibioctets per second on its own.

Whether such a total means anything depends on the calculation being run. A problem that divides so that each node works mostly on its own data can use the full aggregate. A problem where every node must constantly consult every other cannot, and the machine's effective bandwidth falls to what the slowest shared path allows. Most of the art of parallel programming lies in getting problems into the first category.

In octets a pebioctet per second is 1,125,899,906,842,624, and in decimal terms about 1.126 petaoctets per second. The 12.6 per cent difference is the accumulated effect of five multiplications by 1.024, and it is now large enough that no report can leave the convention unstated without introducing real uncertainty.

The unit also appears in descriptions of parallel filesystems at the largest facilities, where a storage system spread across tens of thousands of drives delivers a few pebioctets per second to a compute cluster. That number determines how quickly the machine can checkpoint its state, which in turn determines how much work is lost when a component fails — and in a machine of that size, something is always failing.

For a converter the requirement is simply that the arithmetic be exact and the label preserved. Multiplying by 1,024 five times is not difficult; silently substituting the decimal prefix is the error to avoid.

One pebioctet per second equals 1,024 tebioctets per second, 1,125,899,906,842,624 octets per second, or about 1.126 petaoctets per second.

Information about the Tebibit per second (Tibit/s)

The tebibit per second is a unit of data transfer rate equal to 1,099,511,627,776 bits per second, which is 1,024 gibibits per second. Its symbol is Tibit/s. It is the binary counterpart of the terabit per second, and the two differ by 10 per cent.

Ten per cent is the point at which the distinction becomes a matter of money rather than of pedantry. A supplier quoting a system at a hundred terabits per second and a customer measuring a hundred tebibits per second are not describing the same performance, and the difference is ten terabits — more than most organisations' entire external connectivity.

The rate belongs to the interior of very large machines. The aggregate memory bandwidth of a rack of accelerators, or the internal switching capacity of a large network chip, reaches this range, and both are built from power-of-two structures: memory channels of fixed binary width, switch ports in powers of two, buffers sized in binary. Expressing their totals with binary prefixes preserves the arithmetic that produced them.

In octets a tebibit per second is 137,438,953,472, or 128 gibioctets per second. That is more than any single storage device can supply and more than any external cable carries. It is a figure that describes something happening inside a cabinet, between chips connected by short traces on a board, where the physical distance is measured in centimetres.

Optical research also brushes this range. A laboratory demonstration carrying a petabit per second down one fibre is a thousand times higher, but individual wavelength channels and the electronics driving them work at tebibit-scale aggregates, and papers reporting them often state the binary figure because the underlying frame sizes are binary.

The habit of writing the lowercase i is worth keeping even where the reader is unlikely to check. A number written unambiguously can be converted correctly by anyone who reads it later; one written ambiguously cannot be repaired, and at ten per cent the ambiguity is no longer harmless.

One tebibit per second equals 1,024 gibibits per second, 137,438,953,472 octets per second, or about 1.100 terabits per second.