Conversion from Tebibits per second to Petabits per second

=

Invert

Formula to convert Tebibits per second (Tibit/s) to Petabits per second (Pbit/s)

More information

Tebibits per second to Petabits per second conversion table

Tebibits per second (Tibit/s)Petabits per second (Pbit/s)
1 Tebibit per second0.00109951162778 Pbit/s
2 Tebibits per second0.00219902325555 Pbit/s
3 Tebibits per second0.00329853488333 Pbit/s
4 Tebibits per second0.0043980465111 Pbit/s
5 Tebibits per second0.00549755813888 Pbit/s
10 Tebibits per second0.0109951162778 Pbit/s
20 Tebibits per second0.0219902325555 Pbit/s
25 Tebibits per second0.0274877906944 Pbit/s
50 Tebibits per second0.0549755813888 Pbit/s
100 Tebibits per second0.109951162778 Pbit/s

Data-transfer rate reference points

ReferenceTebibits per second (Tibit/s)Petabits per second (Pbit/s)
A dial-up modem0.0000000509317 Tibit/s5.6 × 10-11 Pbit/s
Typical home broadband0.0000909495 Tibit/s0.0000001 Pbit/s
Gigabit Ethernet0.000909495 Tibit/s0.000001 Pbit/s
Streaming a 4K film0.0000227374 Tibit/s0.000000025 Pbit/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Tebibit per second (Tibit/s)

The tebibit per second is a unit of data transfer rate equal to 1,099,511,627,776 bits per second, which is 1,024 gibibits per second. Its symbol is Tibit/s. It is the binary counterpart of the terabit per second, and the two differ by 10 per cent.

Ten per cent is the point at which the distinction becomes a matter of money rather than of pedantry. A supplier quoting a system at a hundred terabits per second and a customer measuring a hundred tebibits per second are not describing the same performance, and the difference is ten terabits — more than most organisations' entire external connectivity.

The rate belongs to the interior of very large machines. The aggregate memory bandwidth of a rack of accelerators, or the internal switching capacity of a large network chip, reaches this range, and both are built from power-of-two structures: memory channels of fixed binary width, switch ports in powers of two, buffers sized in binary. Expressing their totals with binary prefixes preserves the arithmetic that produced them.

In octets a tebibit per second is 137,438,953,472, or 128 gibioctets per second. That is more than any single storage device can supply and more than any external cable carries. It is a figure that describes something happening inside a cabinet, between chips connected by short traces on a board, where the physical distance is measured in centimetres.

Optical research also brushes this range. A laboratory demonstration carrying a petabit per second down one fibre is a thousand times higher, but individual wavelength channels and the electronics driving them work at tebibit-scale aggregates, and papers reporting them often state the binary figure because the underlying frame sizes are binary.

The habit of writing the lowercase i is worth keeping even where the reader is unlikely to check. A number written unambiguously can be converted correctly by anyone who reads it later; one written ambiguously cannot be repaired, and at ten per cent the ambiguity is no longer harmless.

One tebibit per second equals 1,024 gibibits per second, 137,438,953,472 octets per second, or about 1.100 terabits per second.


Information about the Petabit per second (Pbit/s)

The petabit per second is a unit of data transfer rate equal to a thousand terabits per second. Its symbol is Pbit/s. It marks the frontier of optical transmission research: the rate at which laboratories have carried data down a single strand of glass, and which no deployed system yet approaches.

The records were set by combining three techniques. Multi-core fibre puts several separate light-guiding paths inside one cladding, so that a single strand behaves like a bundle. Wavelength division multiplexing runs hundreds of distinct colours down each of those cores. Advanced modulation encodes many bits into each pulse. Multiplying the three together is what reaches a petabit per second.

Such demonstrations run over tens of kilometres of fibre in controlled conditions, not the thousands of kilometres a working sea cable must span. Distance is the hard part: signals attenuate, dispersion smears pulses together, and non-linear effects in the glass grow with power. Every kilometre added makes the same rate harder to sustain, which is why deployed cables sit two orders of magnitude below the laboratory record.

In octets a petabit per second is 125 teraoctets per second, which is roughly the storage of a hundred and twenty-five large hard drives moved every second. Nothing at either end of such a link could produce or absorb data at that rate; the figure describes the medium's capacity rather than any use of it.

At the network level the unit is used for aggregates. The total interconnect capacity of a very large data centre, the summed capacity of all the cables landing on a continent, and the peak traffic of the largest content networks are quoted in petabits per second. These are sums over thousands of links, not the rating of any one.

The trajectory is worth noting. Transoceanic capacity has grown by roughly a factor of ten every seven or eight years for several decades, driven almost entirely by better electronics and better coding rather than by more glass. If that continues, the petabit per second will describe a working cable within a generation.

One petabit per second equals 1,000 terabits per second, 125 teraoctets per second, or about 0.8882 pebibits per second.