Conversion from Tebibits per second to Gibioctets per second

Information about the Tebibit per second (Tibit/s)

The tebibit per second is a unit of data transfer rate equal to 1,099,511,627,776 bits per second, which is 1,024 gibibits per second. Its symbol is Tibit/s. It is the binary counterpart of the terabit per second, and the two differ by 10 per cent.

Ten per cent is the point at which the distinction becomes a matter of money rather than of pedantry. A supplier quoting a system at a hundred terabits per second and a customer measuring a hundred tebibits per second are not describing the same performance, and the difference is ten terabits — more than most organisations' entire external connectivity.

The rate belongs to the interior of very large machines. The aggregate memory bandwidth of a rack of accelerators, or the internal switching capacity of a large network chip, reaches this range, and both are built from power-of-two structures: memory channels of fixed binary width, switch ports in powers of two, buffers sized in binary. Expressing their totals with binary prefixes preserves the arithmetic that produced them.

In octets a tebibit per second is 137,438,953,472, or 128 gibioctets per second. That is more than any single storage device can supply and more than any external cable carries. It is a figure that describes something happening inside a cabinet, between chips connected by short traces on a board, where the physical distance is measured in centimetres.

Optical research also brushes this range. A laboratory demonstration carrying a petabit per second down one fibre is a thousand times higher, but individual wavelength channels and the electronics driving them work at tebibit-scale aggregates, and papers reporting them often state the binary figure because the underlying frame sizes are binary.

The habit of writing the lowercase i is worth keeping even where the reader is unlikely to check. A number written unambiguously can be converted correctly by anyone who reads it later; one written ambiguously cannot be repaired, and at ten per cent the ambiguity is no longer harmless.

One tebibit per second equals 1,024 gibibits per second, 137,438,953,472 octets per second, or about 1.100 terabits per second.

Information about the Gibioctet per second (Gio/s)

The gibioctet per second is a unit of data transfer rate equal to 1,073,741,824 octets per second, which is 1,024 mebioctets per second. Its symbol is Gio/s. It is the unit of memory bandwidth and of the fastest storage interfaces, and the binary counterpart of the gigaoctet per second, from which it differs by 7.4 per cent.

Memory is where the unit belongs most naturally. A memory channel transfers a fixed number of octets per clock cycle, and that number is a power of two, so the resulting bandwidth is a binary multiple of the clock frequency. A machine with several channels reaches tens of gibioctets per second, and an accelerator with stacked memory reaches thousands.

Storage has caught up. A fast solid-state drive on the current interface sustains several gibioctets per second, which means that for the first time the drive and the memory are within an order of magnitude of each other. That convergence has changed how software is written: the old assumption that reading from disc is thousands of times slower than reading from memory no longer holds.

The unit appears in benchmark output, in system monitoring displays and in the specifications of processor interconnects. All of these count in binary because the structures they measure are binary, and reporting the result with a decimal prefix would introduce a seven per cent error for the sake of a familiar-looking label.

For a sense of what the rate means, one gibioctet per second copies a two-gigaoctet film in under two seconds and fills a one-teraoctet drive in about a quarter of an hour. Anything at this speed is faster than every external connection in an ordinary building, so the limiting factor moves inside the machine.

The distinction from the decimal unit matters most in procurement and capacity planning. A specification that requires 10 gigaoctets per second and a system that delivers 10 gibioctets per second are not the same, and the difference of 7.4 per cent is the sort of margin that decides whether a design meets its requirement.

One gibioctet per second equals 1,073,741,824 octets per second, 1,024 mebioctets per second, or about 1.074 gigaoctets per second.