Conversion from Yottaoctets per second to Kilooctets per second

=

Invert

Formula to convert Yottaoctets per second (Yo/s) to Kilooctets per second (ko/s)

More information

Yottaoctets per second to Kilooctets per second conversion table

Yottaoctets per second (Yo/s)Kilooctets per second (ko/s)
1 Yottaoctet per second1 × 1021 ko/s
2 Yottaoctets per second2 × 1021 ko/s
3 Yottaoctets per second3 × 1021 ko/s
4 Yottaoctets per second4 × 1021 ko/s
5 Yottaoctets per second5 × 1021 ko/s
10 Yottaoctets per second1 × 1022 ko/s
20 Yottaoctets per second2 × 1022 ko/s
25 Yottaoctets per second2.5 × 1022 ko/s
50 Yottaoctets per second5 × 1022 ko/s
100 Yottaoctets per second1 × 1023 ko/s

Data-transfer rate reference points

ReferenceYottaoctets per second (Yo/s)Kilooctets per second (ko/s)
A dial-up modem7 × 10-21 Yo/s7 ko/s
Typical home broadband1.25 × 10-17 Yo/s12500 ko/s
Gigabit Ethernet1.25 × 10-16 Yo/s125000 ko/s
Streaming a 4K film3.125 × 10-18 Yo/s3125 ko/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Yottaoctet per second (Yo/s)

The yottaoctet per second is a unit of data transfer rate equal to a thousand zettaoctets per second, or eight yottabits per second. Its symbol is Yo/s. It is the largest transfer rate the metric system named for thirty years, and it stands at the point where the question stops being one of engineering and becomes one of physics.

The physical limits are real and can be stated. Any communication channel has a capacity set by its bandwidth and its signal-to-noise ratio, a result Claude Shannon proved in 1948. Pushing a rate higher means using more bandwidth, more power, or more parallel channels, and each of those has a cost that grows without limit as the rate does.

Energy sets the sharpest bound. Thermodynamics requires a minimum energy to distinguish one state from another at a given temperature, and although practical systems are many orders of magnitude above that floor, the floor is not zero. At a yottaoctet per second even the theoretical minimum becomes a substantial power, and every real system multiplies it by a large factor.

There is also a limit from the medium itself. A single optical fibre has a capacity ceiling set by non-linear effects in the glass, which grow with the light power carried, so raising the power eventually degrades the signal rather than improving it. Reaching a yottaoctet per second would require something like a hundred billion fibres running at today's records simultaneously, which is a construction problem rather than a communication one.

None of this makes the unit meaningless. It is properly defined, it converts by the same rule as every other, and it appears in discussions of theoretical limits and in complete tables of the prefix system. A measurement system that stopped naming quantities at the point where engineering stops would be less useful, not more.

Since 2022 the metric system has had ronna and quetta above yotta, so this is no longer the top of the ladder. That extension was driven by data quantities rather than by rates, and nothing in transmission has yet given a reason to write a rate above this one.

One yottaoctet per second equals 1,000 zettaoctets per second, 8 yottabits per second, or about 0.8272 yobioctets per second.


Information about the Kilooctet per second (ko/s)

The kilooctet per second is a unit of data transfer rate equal to one thousand octets per second, and therefore to eight kilobits per second. Its symbol is ko/s. It is the unit in which file transfers were reported through the whole of the dial-up era, and it still appears whenever a transfer is slow enough to need it.

The conversion from advertised connection speeds is the reason it matters. A 56-kilobit modem delivered about 7 kilooctets per second in practice, and users learned the relationship by watching progress bars: a one-megaoctet file took about two and a half minutes. The habit of dividing the advertised number by eight and then subtracting a bit for overhead dates from that period.

Storage devices of the era were similar. A floppy disc drive read at roughly 30 to 60 kilooctets per second, a single-speed compact-disc drive at 150, and an early hard drive at a few hundred. Loading a program from any of them was a matter of seconds to minutes, and software was written with that expectation in mind.

The unit still appears in serial communication. The classic serial port ran at rates up to 115,200 bits per second, which is 14.4 kilooctets per second, and equivalent rates are still used to talk to microcontrollers, scientific instruments and industrial equipment. A protocol designed for such a link cannot assume that a large message will arrive quickly.

It also appears at the bottom end of modern networking. A congested mobile connection, a distant satellite link or a heavily shared wireless network can fall to a few tens of kilooctets per second, and at that rate an ordinary web page — which now runs to a few megaoctets — takes a minute or more to load. The unit is a reminder of what the network assumes about its users.

For scale, one kilooctet per second moves a thousand characters of plain text each second, so a short letter transfers in a second and a novel in about ten minutes. Nothing about text has ever needed more than this; every increase in transfer rate since has been consumed by images, sound and video.

One kilooctet per second equals 1,000 octets per second, 8 kilobits per second, or about 0.9766 kibioctets per second.