Conversion from Kilooctets per second to Exaoctets per second

Information about the Kilooctet per second (ko/s)

The kilooctet per second is a unit of data transfer rate equal to one thousand octets per second, and therefore to eight kilobits per second. Its symbol is ko/s. It is the unit in which file transfers were reported through the whole of the dial-up era, and it still appears whenever a transfer is slow enough to need it.

The conversion from advertised connection speeds is the reason it matters. A 56-kilobit modem delivered about 7 kilooctets per second in practice, and users learned the relationship by watching progress bars: a one-megaoctet file took about two and a half minutes. The habit of dividing the advertised number by eight and then subtracting a bit for overhead dates from that period.

Storage devices of the era were similar. A floppy disc drive read at roughly 30 to 60 kilooctets per second, a single-speed compact-disc drive at 150, and an early hard drive at a few hundred. Loading a program from any of them was a matter of seconds to minutes, and software was written with that expectation in mind.

The unit still appears in serial communication. The classic serial port ran at rates up to 115,200 bits per second, which is 14.4 kilooctets per second, and equivalent rates are still used to talk to microcontrollers, scientific instruments and industrial equipment. A protocol designed for such a link cannot assume that a large message will arrive quickly.

It also appears at the bottom end of modern networking. A congested mobile connection, a distant satellite link or a heavily shared wireless network can fall to a few tens of kilooctets per second, and at that rate an ordinary web page — which now runs to a few megaoctets — takes a minute or more to load. The unit is a reminder of what the network assumes about its users.

For scale, one kilooctet per second moves a thousand characters of plain text each second, so a short letter transfers in a second and a novel in about ten minutes. Nothing about text has ever needed more than this; every increase in transfer rate since has been consumed by images, sound and video.

One kilooctet per second equals 1,000 octets per second, 8 kilobits per second, or about 0.9766 kibioctets per second.

Information about the Exaoctet per second (Eo/s)

The exaoctet per second is a unit of data transfer rate equal to a thousand petaoctets per second, or eight exabits per second. Its symbol is Eo/s. Nothing built runs at this rate: it is about eight times the total traffic of the entire internet, counted across every network on the planet at once.

The unit is useful mainly for thought experiments about limits. If every hard drive and flash chip manufactured in a year were read simultaneously at full speed, the combined rate would be in this range. So would the total output of every camera sensor in every phone on Earth if they all recorded at once. These are sums over the whole world's hardware, not rates any system experiences.

There is one situation in which very large data volumes really do move faster than any network, and it puts the unit in perspective. Physically shipping a container of hard drives across an ocean transfers more data per second, averaged over the journey, than any cable. A shipping container holding a few exaoctets crossing the Atlantic in a week works out to several gigaoctets per second, and a truck of drives driven across a city beats almost any local link.

That calculation is not a joke; cloud providers offer it as a service. When a customer needs to move petaoctets into a data centre, the provider ships a lorry full of storage rather than attempting the transfer over a network, because the network would take months. The bandwidth of a vehicle is enormous, though its latency is measured in days.

For the unit itself, an exaoctet per second is 125 petaoctets per second, and it would transfer the world's entire stock of stored data — a few hundred zettaoctets — in about a week of continuous running. No mechanism exists to feed such a link, and none is being designed.

A converter must nevertheless handle the unit, because it appears in aggregate capacity models, in academic papers on the theoretical limits of communication, and in any table that lists the metric prefixes completely. A quantity does not need a use for its name to be well formed.

One exaoctet per second equals 1,000 petaoctets per second, 8 exabits per second, or about 0.8674 exbioctets per second.