Conversion from Kilooctets per second to Mebioctets per second

Information about the Kilooctet per second (ko/s)

The kilooctet per second is a unit of data transfer rate equal to one thousand octets per second, and therefore to eight kilobits per second. Its symbol is ko/s. It is the unit in which file transfers were reported through the whole of the dial-up era, and it still appears whenever a transfer is slow enough to need it.

The conversion from advertised connection speeds is the reason it matters. A 56-kilobit modem delivered about 7 kilooctets per second in practice, and users learned the relationship by watching progress bars: a one-megaoctet file took about two and a half minutes. The habit of dividing the advertised number by eight and then subtracting a bit for overhead dates from that period.

Storage devices of the era were similar. A floppy disc drive read at roughly 30 to 60 kilooctets per second, a single-speed compact-disc drive at 150, and an early hard drive at a few hundred. Loading a program from any of them was a matter of seconds to minutes, and software was written with that expectation in mind.

The unit still appears in serial communication. The classic serial port ran at rates up to 115,200 bits per second, which is 14.4 kilooctets per second, and equivalent rates are still used to talk to microcontrollers, scientific instruments and industrial equipment. A protocol designed for such a link cannot assume that a large message will arrive quickly.

It also appears at the bottom end of modern networking. A congested mobile connection, a distant satellite link or a heavily shared wireless network can fall to a few tens of kilooctets per second, and at that rate an ordinary web page — which now runs to a few megaoctets — takes a minute or more to load. The unit is a reminder of what the network assumes about its users.

For scale, one kilooctet per second moves a thousand characters of plain text each second, so a short letter transfers in a second and a novel in about ten minutes. Nothing about text has ever needed more than this; every increase in transfer rate since has been consumed by images, sound and video.

One kilooctet per second equals 1,000 octets per second, 8 kilobits per second, or about 0.9766 kibioctets per second.

Information about the Mebioctet per second (Mio/s)

The mebioctet per second is a unit of data transfer rate equal to 1,048,576 octets per second, which is 1,024 kibioctets per second. Its symbol is Mio/s. It is the unit that disc benchmarks, copy tools and backup programs report in, and one of the few binary units most people see regularly without noticing.

Storage measurement produces it naturally. A benchmark writes and reads blocks whose size is a power of two, times the operation, and divides. The result is a binary rate, and reporting it as such preserves the arithmetic. A tool that converted to decimal megaoctets would introduce a 4.9 per cent adjustment for no purpose other than to match a marketing convention.

That five per cent is exactly where the two conventions diverge visibly for consumers. A drive advertised at 550 megaoctets per second and measured at 524 mebioctets per second is performing precisely as claimed; the numbers differ only because one is decimal and the other binary. A great deal of complaint about storage performance is this arithmetic misread as a shortfall.

For everyday sizes, one mebioctet per second copies a photograph in three seconds and a two-gigaoctet film in about half an hour. Modern drives run hundreds or thousands of times faster, so the unit is now the resolution at which small differences are reported rather than the scale of the whole figure.

The unit also appears in memory and cache measurements, in database throughput reports and in the output of the low-level commands that write disc images. All of these count in binary blocks because the underlying structures are binary, and all of them report in mebioctets per second because that is what the count divided by the time actually gives.

The habit of writing the lowercase i is worth keeping. It costs one character and it tells a later reader which of two conventions produced the number, which is information that cannot be recovered from context once it has been left out.

One mebioctet per second equals 1,048,576 octets per second, 1,024 kibioctets per second, or about 1.049 megaoctets per second.