Conversion from Gibioctets per second to Kilobits per second

Information about the Gibioctet per second (Gio/s)

The gibioctet per second is a unit of data transfer rate equal to 1,073,741,824 octets per second, which is 1,024 mebioctets per second. Its symbol is Gio/s. It is the unit of memory bandwidth and of the fastest storage interfaces, and the binary counterpart of the gigaoctet per second, from which it differs by 7.4 per cent.

Memory is where the unit belongs most naturally. A memory channel transfers a fixed number of octets per clock cycle, and that number is a power of two, so the resulting bandwidth is a binary multiple of the clock frequency. A machine with several channels reaches tens of gibioctets per second, and an accelerator with stacked memory reaches thousands.

Storage has caught up. A fast solid-state drive on the current interface sustains several gibioctets per second, which means that for the first time the drive and the memory are within an order of magnitude of each other. That convergence has changed how software is written: the old assumption that reading from disc is thousands of times slower than reading from memory no longer holds.

The unit appears in benchmark output, in system monitoring displays and in the specifications of processor interconnects. All of these count in binary because the structures they measure are binary, and reporting the result with a decimal prefix would introduce a seven per cent error for the sake of a familiar-looking label.

For a sense of what the rate means, one gibioctet per second copies a two-gigaoctet film in under two seconds and fills a one-teraoctet drive in about a quarter of an hour. Anything at this speed is faster than every external connection in an ordinary building, so the limiting factor moves inside the machine.

The distinction from the decimal unit matters most in procurement and capacity planning. A specification that requires 10 gigaoctets per second and a system that delivers 10 gibioctets per second are not the same, and the difference of 7.4 per cent is the sort of margin that decides whether a design meets its requirement.

One gibioctet per second equals 1,073,741,824 octets per second, 1,024 mebioctets per second, or about 1.074 gigaoctets per second.

Information about the Kilobit per second (kbit/s)

The kilobit per second is a unit of data transfer rate equal to one thousand bits per second. Its symbol is kbit/s, often written kbps. It was the unit of the dial-up era, and it survives today as the unit in which audio and speech encoding rates are quoted.

The dial-up sequence is worth recalling because each number marks a technical generation. Modems ran at 300 bits per second in the late 1970s, then 1,200, 2,400, 9,600, 14,400, 28,800, 33,600 and finally 56 kilobits per second at the end of the 1990s. That last figure was the ceiling of an ordinary telephone line, set by the eight-kilohertz sampling of the digital telephone network rather than by the modem.

Audio encoding is where the unit now lives. Telephone-quality speech runs at 8 to 64 kilobits per second depending on the codec, with modern low-rate codecs producing intelligible speech at 8 and high-quality voice calls at 24 to 32. Music at 128 kilobits per second was the early standard of portable players, 192 and 256 are common, and 320 is the practical ceiling of the older lossy formats.

Those numbers reward a moment of arithmetic. Music at 128 kilobits per second is 16 kilooctets per second, so a four-minute track is about 3.8 megaoctets. Uncompressed compact-disc audio runs at 1,411 kilobits per second, so the compressed file is about a tenth the size of the original, which is the whole point of the format.

Video subtitle streams, control channels and telemetry links also work in kilobits per second. So does much of the machine-to-machine traffic that fills modern networks: a sensor reporting a reading every few seconds needs a fraction of a kilobit per second, and the protocols designed for such devices are built around keeping the radio switched off most of the time.

The unit's lower-case k marks the decimal kilo, one thousand exactly. In transmission this has never been ambiguous, because network rates have always been counted in true thousands; the binary confusion that afflicts storage units does not arise here, and a kilobit per second means the same thing in every document.

One kilobit per second equals 1,000 bits per second, 125 octets per second, or about 0.9766 kibibits per second.