Conversion from Gibioctets per second to Exaoctets per second

=

Invert

Formula to convert Gibioctets per second (Gio/s) to Exaoctets per second (Eo/s)

More information

Gibioctets per second to Exaoctets per second conversion table

Gibioctets per second (Gio/s)Exaoctets per second (Eo/s)
1 Gibioctet per second0.000000001073741824 Eo/s
2 Gibioctets per second0.000000002147483648 Eo/s
3 Gibioctets per second0.000000003221225472 Eo/s
4 Gibioctets per second0.000000004294967296 Eo/s
5 Gibioctets per second0.00000000536870912 Eo/s
10 Gibioctets per second0.00000001073741824 Eo/s
20 Gibioctets per second0.00000002147483648 Eo/s
25 Gibioctets per second0.0000000268435456 Eo/s
50 Gibioctets per second0.0000000536870912 Eo/s
100 Gibioctets per second0.0000001073741824 Eo/s

Data-transfer rate reference points

ReferenceGibioctets per second (Gio/s)Exaoctets per second (Eo/s)
A dial-up modem0.00000651926 Gio/s7 × 10-15 Eo/s
Typical home broadband0.0116415 Gio/s1.25 × 10-11 Eo/s
Gigabit Ethernet0.116415 Gio/s1.25 × 10-10 Eo/s
Streaming a 4K film0.00291038 Gio/s3.125 × 10-12 Eo/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Gibioctet per second (Gio/s)

The gibioctet per second is a unit of data transfer rate equal to 1,073,741,824 octets per second, which is 1,024 mebioctets per second. Its symbol is Gio/s. It is the unit of memory bandwidth and of the fastest storage interfaces, and the binary counterpart of the gigaoctet per second, from which it differs by 7.4 per cent.

Memory is where the unit belongs most naturally. A memory channel transfers a fixed number of octets per clock cycle, and that number is a power of two, so the resulting bandwidth is a binary multiple of the clock frequency. A machine with several channels reaches tens of gibioctets per second, and an accelerator with stacked memory reaches thousands.

Storage has caught up. A fast solid-state drive on the current interface sustains several gibioctets per second, which means that for the first time the drive and the memory are within an order of magnitude of each other. That convergence has changed how software is written: the old assumption that reading from disc is thousands of times slower than reading from memory no longer holds.

The unit appears in benchmark output, in system monitoring displays and in the specifications of processor interconnects. All of these count in binary because the structures they measure are binary, and reporting the result with a decimal prefix would introduce a seven per cent error for the sake of a familiar-looking label.

For a sense of what the rate means, one gibioctet per second copies a two-gigaoctet film in under two seconds and fills a one-teraoctet drive in about a quarter of an hour. Anything at this speed is faster than every external connection in an ordinary building, so the limiting factor moves inside the machine.

The distinction from the decimal unit matters most in procurement and capacity planning. A specification that requires 10 gigaoctets per second and a system that delivers 10 gibioctets per second are not the same, and the difference of 7.4 per cent is the sort of margin that decides whether a design meets its requirement.

One gibioctet per second equals 1,073,741,824 octets per second, 1,024 mebioctets per second, or about 1.074 gigaoctets per second.


Information about the Exaoctet per second (Eo/s)

The exaoctet per second is a unit of data transfer rate equal to a thousand petaoctets per second, or eight exabits per second. Its symbol is Eo/s. Nothing built runs at this rate: it is about eight times the total traffic of the entire internet, counted across every network on the planet at once.

The unit is useful mainly for thought experiments about limits. If every hard drive and flash chip manufactured in a year were read simultaneously at full speed, the combined rate would be in this range. So would the total output of every camera sensor in every phone on Earth if they all recorded at once. These are sums over the whole world's hardware, not rates any system experiences.

There is one situation in which very large data volumes really do move faster than any network, and it puts the unit in perspective. Physically shipping a container of hard drives across an ocean transfers more data per second, averaged over the journey, than any cable. A shipping container holding a few exaoctets crossing the Atlantic in a week works out to several gigaoctets per second, and a truck of drives driven across a city beats almost any local link.

That calculation is not a joke; cloud providers offer it as a service. When a customer needs to move petaoctets into a data centre, the provider ships a lorry full of storage rather than attempting the transfer over a network, because the network would take months. The bandwidth of a vehicle is enormous, though its latency is measured in days.

For the unit itself, an exaoctet per second is 125 petaoctets per second, and it would transfer the world's entire stock of stored data — a few hundred zettaoctets — in about a week of continuous running. No mechanism exists to feed such a link, and none is being designed.

A converter must nevertheless handle the unit, because it appears in aggregate capacity models, in academic papers on the theoretical limits of communication, and in any table that lists the metric prefixes completely. A quantity does not need a use for its name to be well formed.

One exaoctet per second equals 1,000 petaoctets per second, 8 exabits per second, or about 0.8674 exbioctets per second.