Conversion from Megabits to Mebibits

Information about the Megabit (Mbit)

The megabit is a unit of digital information equal to one million bits. Its symbol is Mbit. It is the unit in which the speed of an internet connection is almost always advertised, which makes it one of the few data units that ordinary consumers encounter by name every time they choose a service.

A megabit is one million bits exactly, not 1,048,576. That distinction has practical consequences. A megabit holds 125,000 octets, which is 125 kilooctets, so a connection running at 100 megabits per second transfers about 12.5 megaoctets per second at best. A file listed as 500 megaoctets therefore takes a minimum of forty seconds, not the four the advertised number seems to promise.

That factor of eight is the reason so many people believe their connection is slower than they were sold. Nothing dishonest is happening: the industry quotes throughput in bits per second because that is what the physical layer actually carries, while file managers quote size in octets because that is how storage is organised. Both conventions are correct in their own domain, and the arithmetic between them is a division by eight.

Real throughput is lower still. Protocol headers, error correction and retransmission all consume capacity, and the usable share of a link is typically 90 to 95 per cent of its nominal rate. Wireless links lose more, because the medium is shared and interference forces retries. A connection advertised at 100 megabits per second commonly delivers 90 or so in practice, and less over a busy wireless network.

The numbers that define the eras are worth remembering. Early broadband offered 1 to 8 megabits per second, cable and fibre pushed that to 50 and 100, and gigabit services are now common in cities. High-definition video streaming needs roughly 5 megabits per second, ultra-high-definition roughly 25, and a video call between two 8, so a household's real requirement is usually far below what it buys.

In memory the megabit describes chip capacity. A 512-megabit memory chip holds 64 megaoctets, and several such chips make a module. Manufacturers count in bits because that is what the silicon holds; buyers count in octets because that is what the operating system reports.

One megabit equals 1,000,000 bits, 1,000 kilobits, 125 kilooctets, or about 0.9537 mebibits.

Information about the Mebibit (Mibit)

The mebibit is a unit of digital information equal to 1,048,576 bits, which is 1,024 kibibits or two to the twentieth power. Its symbol is Mibit. It is the binary counterpart of the megabit, and the difference between the two has grown to 4.9 per cent — small enough to be ignored casually, large enough to matter in a specification.

Its natural home is semiconductor memory, where capacity is fixed by the address lines on the chip. A memory die with twenty address bits can reach exactly 1,048,576 locations, so densities land on powers of two rather than on round decimal numbers. A chip described as 512 megabits in a catalogue is very often 512 mebibits in reality, which is 537 megabits, and the datasheet is where the truth is written.

That habit is old and deliberate. Semiconductor manufacturers have always sized memory in binary because the wiring makes any other choice wasteful: an address bus is a fixed number of lines, and using only part of the range it can reach throws away silicon. Storage manufacturers had no such constraint, which is precisely why the two industries diverged.

For a sense of quantity, a mebibit is 131,072 octets, or about 128 kibioctets. That is roughly the contents of a long book as plain text, or a single low-resolution image. In network terms it is a hundredth of a second of a gigabit link.

The IEC prefixes were introduced in 1998 partly because at this level and above the approximation stops being safe. Buying a component described as one megabit and receiving one mebibit is a five per cent surprise; at the tebibit the same confusion is a ten per cent surprise, and in a contract for a data centre that is a real sum of money.

Correct usage is now common in standards documents, in hardware datasheets and in operating system internals, and rare in advertising and consumer software. The best rule when reading a figure is to ask which industry produced it: if it describes memory or a chip, assume binary; if it describes storage or a link, assume decimal.

One mebibit equals 1,048,576 bits, 1,024 kibibits, 131,072 octets, or about 1.049 megabits.