Conversion from Megabits to Kibibits

Information about the Megabit (Mbit)

The megabit is a unit of digital information equal to one million bits. Its symbol is Mbit. It is the unit in which the speed of an internet connection is almost always advertised, which makes it one of the few data units that ordinary consumers encounter by name every time they choose a service.

A megabit is one million bits exactly, not 1,048,576. That distinction has practical consequences. A megabit holds 125,000 octets, which is 125 kilooctets, so a connection running at 100 megabits per second transfers about 12.5 megaoctets per second at best. A file listed as 500 megaoctets therefore takes a minimum of forty seconds, not the four the advertised number seems to promise.

That factor of eight is the reason so many people believe their connection is slower than they were sold. Nothing dishonest is happening: the industry quotes throughput in bits per second because that is what the physical layer actually carries, while file managers quote size in octets because that is how storage is organised. Both conventions are correct in their own domain, and the arithmetic between them is a division by eight.

Real throughput is lower still. Protocol headers, error correction and retransmission all consume capacity, and the usable share of a link is typically 90 to 95 per cent of its nominal rate. Wireless links lose more, because the medium is shared and interference forces retries. A connection advertised at 100 megabits per second commonly delivers 90 or so in practice, and less over a busy wireless network.

The numbers that define the eras are worth remembering. Early broadband offered 1 to 8 megabits per second, cable and fibre pushed that to 50 and 100, and gigabit services are now common in cities. High-definition video streaming needs roughly 5 megabits per second, ultra-high-definition roughly 25, and a video call between two 8, so a household's real requirement is usually far below what it buys.

In memory the megabit describes chip capacity. A 512-megabit memory chip holds 64 megaoctets, and several such chips make a module. Manufacturers count in bits because that is what the silicon holds; buyers count in octets because that is what the operating system reports.

One megabit equals 1,000,000 bits, 1,000 kilobits, 125 kilooctets, or about 0.9537 mebibits.

Information about the Kibibit (Kibit)

The kibibit is a unit of digital information equal to 1,024 bits. Its symbol is Kibit. It is the first of the binary prefixes, a set of units defined by the International Electrotechnical Commission in 1998 to end a confusion that had run through computing since the 1960s.

The problem was straightforward. Computers address memory in powers of two, so memory came in chunks of 1,024 rather than 1,000. Engineers borrowed the metric prefix kilo for that quantity because 1,024 is close to 1,000, and for small numbers the approximation was harmless. But storage and transmission counted in true thousands, so the same prefix meant two different things depending on which part of the machine was being described.

The IEC's solution was to coin new names. Kibi is a contraction of kilo binary, and the pattern continues with mebi, gibi, tebi, pebi, exbi, zebi and yobi. Each is 1,024 times the one below, and each symbol takes the form of a capital letter followed by a lowercase i: Ki, Mi, Gi, Ti and so on. The kilobit then means one thousand bits and nothing else.

A kibibit is 128 octets, and the gap from a kilobit is 2.4 per cent. That small difference is why the two were confused for so long: at this scale nobody notices. The error compounds by 2.4 per cent at every step, reaching 5 per cent at the mebibit, 7 per cent at the gibibit and 21 per cent by the yobibit, which is where the ambiguity became genuinely expensive.

Adoption has been partial and uneven. Standards bodies, the Linux kernel and most technical documentation use the IEC prefixes correctly. Consumer software largely does not, and many programs still write KB while dividing by 1,024. The result is that a reader must often infer from context which convention a number follows, which is exactly what the standard was written to prevent.

In practice the kibibit itself appears mainly in the specifications of small memory chips, in serial memory used by embedded systems, and in protocol documents where an exact power of two matters. Anywhere the number 1,024 is meant rather than 1,000, this is the correct unit.

One kibibit equals 1,024 bits, 128 octets, or 1.024 kilobits.