| Mebibits (Mibit) | Mebioctets (Mio) |
|---|---|
| 1 Mebibit | 0.125 Mio |
| 2 Mebibits | 0.25 Mio |
| 3 Mebibits | 0.375 Mio |
| 4 Mebibits | 0.5 Mio |
| 5 Mebibits | 0.625 Mio |
| 10 Mebibits | 1.25 Mio |
| 20 Mebibits | 2.5 Mio |
| 25 Mebibits | 3.125 Mio |
| 50 Mebibits | 6.25 Mio |
| 100 Mebibits | 12.5 Mio |
| Reference | Mebibits (Mibit) | Mebioctets (Mio) |
|---|---|---|
| A plain text message (160 characters) | 0.0012207 Mibit | 0.000152588 Mio |
| A three-minute MP3 | 22.8882 Mibit | 2.86102 Mio |
| A smartphone photo | 30.5176 Mibit | 3.8147 Mio |
| A high-definition film | 30517.6 Mibit | 3814.7 Mio |
| A dual-layer Blu-ray disc | 381470 Mibit | 47683.7 Mio |
The mebibit is a unit of digital information equal to 1,048,576 bits, which is 1,024 kibibits or two to the twentieth power. Its symbol is Mibit. It is the binary counterpart of the megabit, and the difference between the two has grown to 4.9 per cent — small enough to be ignored casually, large enough to matter in a specification.
Its natural home is semiconductor memory, where capacity is fixed by the address lines on the chip. A memory die with twenty address bits can reach exactly 1,048,576 locations, so densities land on powers of two rather than on round decimal numbers. A chip described as 512 megabits in a catalogue is very often 512 mebibits in reality, which is 537 megabits, and the datasheet is where the truth is written.
That habit is old and deliberate. Semiconductor manufacturers have always sized memory in binary because the wiring makes any other choice wasteful: an address bus is a fixed number of lines, and using only part of the range it can reach throws away silicon. Storage manufacturers had no such constraint, which is precisely why the two industries diverged.
For a sense of quantity, a mebibit is 131,072 octets, or about 128 kibioctets. That is roughly the contents of a long book as plain text, or a single low-resolution image. In network terms it is a hundredth of a second of a gigabit link.
The IEC prefixes were introduced in 1998 partly because at this level and above the approximation stops being safe. Buying a component described as one megabit and receiving one mebibit is a five per cent surprise; at the tebibit the same confusion is a ten per cent surprise, and in a contract for a data centre that is a real sum of money.
Correct usage is now common in standards documents, in hardware datasheets and in operating system internals, and rare in advertising and consumer software. The best rule when reading a figure is to ask which industry produced it: if it describes memory or a chip, assume binary; if it describes storage or a link, assume decimal.
One mebibit equals 1,048,576 bits, 1,024 kibibits, 131,072 octets, or about 1.049 megabits.
The mebioctet is a unit of digital information equal to 1,048,576 octets, which is 1,024 kibioctets. Its symbol is Mio. It is the binary counterpart of the megaoctet, and the two differ by 4.9 per cent — the point at which a careful writer starts distinguishing them.
The unit's most visible home is the processor cache. The fast memory built into a processor to hold recently used data is sized in binary, and modern chips carry caches measured in mebioctets: a few hundred kibioctets at the second level and tens of mebioctets at the third. Those figures are exact powers of two because the cache is addressed by dividing an address into fixed bit fields.
Block sizes and buffers follow the same logic. Filesystems allocate in blocks, database engines read in pages, compression tools work in windows, and all of these are powers of two, most often a few mebioctets. A tool that offers a buffer of 16 megaoctets almost always means 16 mebioctets, because the underlying allocation is a shift rather than a multiplication.
The distinction has become visible to ordinary users through the discrepancy between what a download claims and what a file manager reports. A file described as 100 megaoctets on a website is often 100 mebioctets on disc, or the reverse, and the resulting 4.9 per cent difference is enough to make a progress bar look wrong without anything actually being wrong.
For scale, a mebioctet holds a million characters of unaccented text — roughly a long novel, or five hundred pages. It is also a single photograph from a modest camera, or eight seconds of high-definition video. The same unit therefore describes both a very large amount of text and a very small amount of video, which says a good deal about the relative cost of representing the two.
The IEC notation Mio is used in technical documentation, in the Linux kernel, in filesystem tools and in standards. It remains rare in consumer software, where MB is written for both quantities. When a figure matters, the safest habit is to compute in octets and convert once at the end.
One mebioctet equals 1,048,576 octets, 1,024 kibioctets, 8 mebibits, or about 1.049 megaoctets.