Conversion from Kilobits per second to Gigabits per second

Information about the Kilobit per second (kbit/s)

The kilobit per second is a unit of data transfer rate equal to one thousand bits per second. Its symbol is kbit/s, often written kbps. It was the unit of the dial-up era, and it survives today as the unit in which audio and speech encoding rates are quoted.

The dial-up sequence is worth recalling because each number marks a technical generation. Modems ran at 300 bits per second in the late 1970s, then 1,200, 2,400, 9,600, 14,400, 28,800, 33,600 and finally 56 kilobits per second at the end of the 1990s. That last figure was the ceiling of an ordinary telephone line, set by the eight-kilohertz sampling of the digital telephone network rather than by the modem.

Audio encoding is where the unit now lives. Telephone-quality speech runs at 8 to 64 kilobits per second depending on the codec, with modern low-rate codecs producing intelligible speech at 8 and high-quality voice calls at 24 to 32. Music at 128 kilobits per second was the early standard of portable players, 192 and 256 are common, and 320 is the practical ceiling of the older lossy formats.

Those numbers reward a moment of arithmetic. Music at 128 kilobits per second is 16 kilooctets per second, so a four-minute track is about 3.8 megaoctets. Uncompressed compact-disc audio runs at 1,411 kilobits per second, so the compressed file is about a tenth the size of the original, which is the whole point of the format.

Video subtitle streams, control channels and telemetry links also work in kilobits per second. So does much of the machine-to-machine traffic that fills modern networks: a sensor reporting a reading every few seconds needs a fraction of a kilobit per second, and the protocols designed for such devices are built around keeping the radio switched off most of the time.

The unit's lower-case k marks the decimal kilo, one thousand exactly. In transmission this has never been ambiguous, because network rates have always been counted in true thousands; the binary confusion that afflicts storage units does not arise here, and a kilobit per second means the same thing in every document.

One kilobit per second equals 1,000 bits per second, 125 octets per second, or about 0.9766 kibibits per second.

Information about the Gigabit per second (Gbit/s)

The gigabit per second is a unit of data transfer rate equal to one thousand million bits per second. Its symbol is Gbit/s, often written Gbps. It names the standard of wired local networking and, increasingly, of domestic fibre connections.

Gigabit Ethernet was standardised in 1998 for optical fibre and in 1999 for ordinary twisted-pair copper, and the copper version is what made it universal. It runs a hundred metres over the same cabling that carried the hundred-megabit standard before it, which meant buildings could be upgraded by replacing equipment rather than wiring. That single property fixed the gigabit as the default connection for a generation.

In octets a gigabit per second is 125 megaoctets per second. That is roughly the speed of a good mechanical hard drive and well below a modern solid-state drive, which is why gigabit networking is no longer the bottleneck it once was: the network can now outrun the storage at one end or the other in many common setups.

Domestic fibre services advertise a gigabit routinely, and the figure has become a marketing threshold more than a technical one. Practically no household can saturate it — a gigabit is enough for around two hundred simultaneous high-definition video streams — and the benefit in daily use is not throughput but the absence of congestion, which keeps latency low and steady.

Above the gigabit the ladder continues in the same steps. Ten-gigabit Ethernet is standard between servers and switches in data centres; twenty-five, forty, hundred and four-hundred-gigabit links join racks, buildings and cities. Each is a multiple of the same unit, and each is still counted in bits per second because that is what the optics and the copper actually carry.

Wireless has followed. The later wireless local network standards quote peak rates above a gigabit per second, though those figures assume a single device, ideal conditions and the full width of the channel. Real wireless throughput in a normal home is typically a third to a half of the advertised peak, and the gap widens with every additional device.

One gigabit per second equals 1,000,000,000 bits per second, 125 megaoctets per second, or about 0.9313 gibibits per second.