Conversion from 4 Tebibits per second to Kibibits per second

Information about the Tebibit per second (Tibit/s)

The tebibit per second is a unit of data transfer rate equal to 1,099,511,627,776 bits per second, which is 1,024 gibibits per second. Its symbol is Tibit/s. It is the binary counterpart of the terabit per second, and the two differ by 10 per cent.

Ten per cent is the point at which the distinction becomes a matter of money rather than of pedantry. A supplier quoting a system at a hundred terabits per second and a customer measuring a hundred tebibits per second are not describing the same performance, and the difference is ten terabits — more than most organisations' entire external connectivity.

The rate belongs to the interior of very large machines. The aggregate memory bandwidth of a rack of accelerators, or the internal switching capacity of a large network chip, reaches this range, and both are built from power-of-two structures: memory channels of fixed binary width, switch ports in powers of two, buffers sized in binary. Expressing their totals with binary prefixes preserves the arithmetic that produced them.

In octets a tebibit per second is 137,438,953,472, or 128 gibioctets per second. That is more than any single storage device can supply and more than any external cable carries. It is a figure that describes something happening inside a cabinet, between chips connected by short traces on a board, where the physical distance is measured in centimetres.

Optical research also brushes this range. A laboratory demonstration carrying a petabit per second down one fibre is a thousand times higher, but individual wavelength channels and the electronics driving them work at tebibit-scale aggregates, and papers reporting them often state the binary figure because the underlying frame sizes are binary.

The habit of writing the lowercase i is worth keeping even where the reader is unlikely to check. A number written unambiguously can be converted correctly by anyone who reads it later; one written ambiguously cannot be repaired, and at ten per cent the ambiguity is no longer harmless.

One tebibit per second equals 1,024 gibibits per second, 137,438,953,472 octets per second, or about 1.100 terabits per second.

Information about the Kibibit per second (Kibit/s)

The kibibit per second is a unit of data transfer rate equal to 1,024 bits per second. Its symbol is Kibit/s. It is the binary counterpart of the kilobit per second, and it is the least used member of an already unusual family, because transfer rates are one of the few places in computing where the decimal convention has always been unambiguous.

Networking has counted in true thousands from the beginning. A modem rated at 56 kilobits per second meant fifty-six thousand, not fifty-seven thousand three hundred and forty-four. The reason is that a transmission rate is set by a clock, and clocks are specified in decimal frequencies: a link running at ten million symbols per second carries a decimal number of bits, not a power of two.

The binary prefixes exist for quantities, not for rates, because quantities of storage are organised in powers of two while time is not. There is no natural reason for a rate to be a power of two, and consequently no reason for a rate unit to need a binary prefix. Where one appears, it is almost always because a program divided a binary file size by a duration.

That is exactly where the kibibit per second does turn up. A tool that measures a transfer by counting kibioctets and dividing by seconds produces a rate in kibioctets per second, and multiplying by eight gives kibibits per second. The unit is a consequence of the arithmetic rather than a description of the channel.

For scale, a kibibit per second is 128 octets per second, and the difference from a kilobit per second is 2.4 per cent — smaller than the measurement error of almost any real throughput test. At this level the distinction is technically correct and practically invisible, which is a fair description of the whole binary prefix system at its lower end.

The unit is properly defined and a converter must handle it, because the IEC series applies to every unit without exception. Whether anyone writes it is a separate question from whether it means something definite, and it does.

One kibibit per second equals 1,024 bits per second, 128 octets per second, or 1.024 kilobits per second.