Conversion from Kibibits per second to Kilobits per second

=

Invert

Formula to convert Kibibits per second (Kibit/s) to Kilobits per second (kbit/s)

More information

Kibibits per second to Kilobits per second conversion table

Kibibits per second (Kibit/s)Kilobits per second (kbit/s)
1 Kibibit per second1.024 kbit/s
2 Kibibits per second2.048 kbit/s
3 Kibibits per second3.072 kbit/s
4 Kibibits per second4.096 kbit/s
5 Kibibits per second5.12 kbit/s
10 Kibibits per second10.24 kbit/s
20 Kibibits per second20.48 kbit/s
25 Kibibits per second25.6 kbit/s
50 Kibibits per second51.2 kbit/s
100 Kibibits per second102.4 kbit/s

Data-transfer rate reference points

ReferenceKibibits per second (Kibit/s)Kilobits per second (kbit/s)
A dial-up modem54.6875 Kibit/s56 kbit/s
Typical home broadband97656.2 Kibit/s100000 kbit/s
Gigabit Ethernet976562 Kibit/s1000000 kbit/s
Streaming a 4K film24414.1 Kibit/s25000 kbit/s

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Kibibit per second (Kibit/s)

The kibibit per second is a unit of data transfer rate equal to 1,024 bits per second. Its symbol is Kibit/s. It is the binary counterpart of the kilobit per second, and it is the least used member of an already unusual family, because transfer rates are one of the few places in computing where the decimal convention has always been unambiguous.

Networking has counted in true thousands from the beginning. A modem rated at 56 kilobits per second meant fifty-six thousand, not fifty-seven thousand three hundred and forty-four. The reason is that a transmission rate is set by a clock, and clocks are specified in decimal frequencies: a link running at ten million symbols per second carries a decimal number of bits, not a power of two.

The binary prefixes exist for quantities, not for rates, because quantities of storage are organised in powers of two while time is not. There is no natural reason for a rate to be a power of two, and consequently no reason for a rate unit to need a binary prefix. Where one appears, it is almost always because a program divided a binary file size by a duration.

That is exactly where the kibibit per second does turn up. A tool that measures a transfer by counting kibioctets and dividing by seconds produces a rate in kibioctets per second, and multiplying by eight gives kibibits per second. The unit is a consequence of the arithmetic rather than a description of the channel.

For scale, a kibibit per second is 128 octets per second, and the difference from a kilobit per second is 2.4 per cent — smaller than the measurement error of almost any real throughput test. At this level the distinction is technically correct and practically invisible, which is a fair description of the whole binary prefix system at its lower end.

The unit is properly defined and a converter must handle it, because the IEC series applies to every unit without exception. Whether anyone writes it is a separate question from whether it means something definite, and it does.

One kibibit per second equals 1,024 bits per second, 128 octets per second, or 1.024 kilobits per second.


Information about the Kilobit per second (kbit/s)

The kilobit per second is a unit of data transfer rate equal to one thousand bits per second. Its symbol is kbit/s, often written kbps. It was the unit of the dial-up era, and it survives today as the unit in which audio and speech encoding rates are quoted.

The dial-up sequence is worth recalling because each number marks a technical generation. Modems ran at 300 bits per second in the late 1970s, then 1,200, 2,400, 9,600, 14,400, 28,800, 33,600 and finally 56 kilobits per second at the end of the 1990s. That last figure was the ceiling of an ordinary telephone line, set by the eight-kilohertz sampling of the digital telephone network rather than by the modem.

Audio encoding is where the unit now lives. Telephone-quality speech runs at 8 to 64 kilobits per second depending on the codec, with modern low-rate codecs producing intelligible speech at 8 and high-quality voice calls at 24 to 32. Music at 128 kilobits per second was the early standard of portable players, 192 and 256 are common, and 320 is the practical ceiling of the older lossy formats.

Those numbers reward a moment of arithmetic. Music at 128 kilobits per second is 16 kilooctets per second, so a four-minute track is about 3.8 megaoctets. Uncompressed compact-disc audio runs at 1,411 kilobits per second, so the compressed file is about a tenth the size of the original, which is the whole point of the format.

Video subtitle streams, control channels and telemetry links also work in kilobits per second. So does much of the machine-to-machine traffic that fills modern networks: a sensor reporting a reading every few seconds needs a fraction of a kilobit per second, and the protocols designed for such devices are built around keeping the radio switched off most of the time.

The unit's lower-case k marks the decimal kilo, one thousand exactly. In transmission this has never been ambiguous, because network rates have always been counted in true thousands; the binary confusion that afflicts storage units does not arise here, and a kilobit per second means the same thing in every document.

One kilobit per second equals 1,000 bits per second, 125 octets per second, or about 0.9766 kibibits per second.