Conversion from 4 Mebibits per second to Megaoctets per second

Information about the Mebibit per second (Mibit/s)

The mebibit per second is a unit of data transfer rate equal to 1,048,576 bits per second. Its symbol is Mibit/s. It is the binary counterpart of the megabit per second, and the two differ by 4.9 per cent — small, but large enough to change a headline figure.

That five per cent is where the unit starts to matter. A connection advertised at 100 megabits per second and a connection at 100 mebibits per second differ by about five megabits, which is a whole high-definition video stream. In a specification, a contract or a benchmark report, quoting one and delivering the other is a real discrepancy rather than a rounding difference.

In practice the confusion is rare in networking, because network equipment is always specified in decimal. What produces mebibit figures is measurement software: a tool that counts a transfer in mebioctets and divides by elapsed seconds is reporting a binary rate, and multiplying by eight makes it mebibits per second. A person comparing that reading with an advertised rate must convert twice, once for the base and once for the factor of eight.

Where a genuine binary rate does arise is inside a machine. A memory bus transfers a fixed number of bits per clock cycle, and the width is a power of two — sixty-four bits at a time, for instance — so the quantity moved per cycle is binary even though the clock frequency is not. Rates derived from such a structure are naturally expressed with binary prefixes.

For scale, a mebibit per second is 131,072 octets per second, or about 128 kibioctets per second. That is roughly a photograph every two seconds, or a plain-text novel every four. It is a rate at which the modern web is slow but usable, which puts it in the range that mobile networks fall to when congested.

The correct symbol has the lowercase i, and its presence is the only reliable way to tell the two conventions apart. A document writing Mbit/s in a context where the underlying figure came from a binary computation has misstated its own measurement by five per cent.

One mebibit per second equals 1,048,576 bits per second, 131,072 octets per second, or about 1.049 megabits per second.

Information about the Megaoctet per second (Mo/s)

The megaoctet per second is a unit of data transfer rate equal to one million octets per second, or eight megabits per second. Its symbol is Mo/s. It is the unit in which storage devices and their interfaces are rated, and the one a file manager shows while a copy is running.

Storage speeds fall naturally into this range. A mechanical hard drive sustains 100 to 250 megaoctets per second on sequential reads. A solid-state drive on the older interface reaches about 550, which is the limit of that interface rather than of the drive. A modern drive on the faster interface reaches several thousand, at which point the unit gives way to gigaoctets per second.

Interface speeds tell the same story from the other side. The successive versions of the universal serial bus have offered roughly 1.5, 60, 625 and 2,500 megaoctets per second at their nominal rates, and memory card standards have followed a similar path. A device is always limited by whichever of the two is slower, and matching them is the practical art of building a fast system.

For everyday sizes, one megaoctet per second transfers a photograph in a couple of seconds and a two-gigaoctet film in about half an hour. At 500 megaoctets per second the same film takes four seconds. That contrast explains why the perceived speed of a computer changed so completely when solid-state storage replaced mechanical drives, even though processors improved far less over the same period.

Sequential rates like these are the best case. Reading many small files instead of one large one costs far more, because each file requires locating its data and reading its record. A drive that sustains 500 megaoctets per second in sequence may manage only a few tens when copying a directory of thousands of small files, and that is where the difference between drive technologies is most visible.

The unit also describes the throughput of a busy network connection: a gigabit link delivers 125 megaoctets per second at best, so a fast local network and a fast drive are now comparable, and neither is obviously the limiting factor in a transfer.

One megaoctet per second equals 1,000,000 octets per second, 8 megabits per second, or about 0.9537 mebioctets per second.