| Megaliters (ML) | Gigaliters (GL) |
|---|---|
| 1 Megaliter | 0.001 GL |
| 2 Megaliters | 0.002 GL |
| 3 Megaliters | 0.003 GL |
| 4 Megaliters | 0.004 GL |
| 5 Megaliters | 0.005 GL |
| 10 Megaliters | 0.01 GL |
| 20 Megaliters | 0.02 GL |
| 25 Megaliters | 0.025 GL |
| 50 Megaliters | 0.05 GL |
| 100 Megaliters | 0.1 GL |
| Reference | Megaliters (ML) | Gigaliters (GL) |
|---|---|---|
| A teaspoon | 0.000000005 ML | 5 × 10-12 GL |
| A can of soft drink | 0.00000033 ML | 3.3 × 10-10 GL |
| A wine bottle | 0.00000075 ML | 7.5 × 10-10 GL |
| A bathtub | 0.00015 ML | 0.00000015 GL |
| An Olympic swimming pool | 2.5 ML | 0.0025 GL |
The megalitre is a unit of volume equal to one million litres, or one thousand cubic metres. Its symbol is ML. It is the working unit of water management: irrigation entitlements, treatment works capacity, farm dams and the trading of water rights are all counted in megalitres, because the quantities involved are far too large for litres and awkwardly small for cubic kilometres.
Australia has made the most of it. Irrigation water in the Murray-Darling Basin is held as entitlements measured in megalitres, seasonal allocations are announced as a percentage of those entitlements, and the resulting rights are traded on an open market where prices are quoted in dollars per megalitre. That market is among the largest of its kind in the world, and every price in it is a price per million litres.
British water utilities use it for throughput. A treatment works is rated in megalitres per day, distribution zones are balanced in the same unit, and leakage is reported as megalitres lost daily across a network. Because a large city consumes several hundred megalitres a day, the unit keeps national and regional figures in three or four digits rather than in unreadable strings of zeros.
A familiar object fixes the scale. An Olympic swimming pool of fifty metres by twenty-five, filled to two metres, holds 2500 cubic metres, which is two and a half megalitres. Journalism uses that comparison constantly for reservoir levels and flood volumes, and it works precisely because the pool and the unit are within a factor of three of each other.
On farms the unit describes storage. An Australian farm dam might hold anything from five to fifty megalitres, an on-farm irrigation season is planned in megalitres per hectare, and evaporation losses from open storage are estimated the same way. Sewage treatment, industrial process water and mine site water balances all follow.
Its one hazard is typographic. In the correct symbols, mL is a millilitre and ML is a megalitre, and the two differ by a factor of a thousand million. A document that is careless about capitals can therefore turn a laboratory volume into a reservoir, which is why water and clinical writing both insist on the case being right.
One megalitre equals 1,000,000 litres, 1000 cubic metres, about 264,172 US gallons, or about 220,000 imperial gallons.
The gigalitre is a unit of volume equal to a billion litres, or one million cubic metres. Its symbol is GL. It is also exactly one cubic hectometre, which is the same quantity written in coherent SI form. It is the unit in which reservoirs, catchments and national water plans are counted, and it is where water measurement stops describing supply and starts describing landscape.
Dam storage is its principal use. Australian reservoir levels are published in gigalitres and as a percentage of a stated capacity in the same unit, so a city's water security can be read as a single number that changes week by week. Warragamba Dam, which supplies most of Sydney, holds a little over two thousand gigalitres when full, and the whole system a few hundred more.
Policy is written in it as well. The Murray-Darling Basin Plan set out to recover water for the environment in gigalitres, and every argument about that plan has been an argument about how many gigalitres should come out of irrigation and go back into rivers. Desalination plants are rated the same way: a large plant produces something like ninety gigalitres a year, which is a meaningful fraction of a city's demand.
Australians have an informal comparison for it. The volume of Sydney Harbour is taken as roughly five hundred gigalitres, and flood volumes, storage losses and river flows are described in harbours as casually as elsewhere they are described in swimming pools. Two thousand Olympic pools make one gigalitre, which is the more portable comparison for readers elsewhere.
The unit's identity with the cubic hectometre is worth holding on to. Spanish and Latin American hydrology publishes reservoir capacity in cubic hectometres, so a Spanish figure of 500 hm³ and an Australian figure of 500 GL describe exactly the same body of water, and any comparison between the two systems needs no arithmetic at all.
Above the gigalitre, water quantities pass to the cubic kilometre, which is a thousand of them, and are used for lakes, ice sheets and global budgets rather than for anything a government can manage. Below it, the megalitre takes over for individual farms, works and pipelines.
One gigalitre equals 1,000,000,000 litres, 1,000,000 cubic metres, 1 cubic hectometre, or about 264 million US gallons.