| Gigaliters (GL) | Decaliters (daL) |
|---|---|
| 1 Gigaliter | 100000000 daL |
| 2 Gigaliters | 200000000 daL |
| 3 Gigaliters | 300000000 daL |
| 4 Gigaliters | 400000000 daL |
| 5 Gigaliters | 500000000 daL |
| 10 Gigaliters | 1000000000 daL |
| 20 Gigaliters | 2000000000 daL |
| 25 Gigaliters | 2500000000 daL |
| 50 Gigaliters | 5000000000 daL |
| 100 Gigaliters | 10000000000 daL |
| Reference | Gigaliters (GL) | Decaliters (daL) |
|---|---|---|
| A teaspoon | 5 × 10-12 GL | 0.0005 daL |
| A can of soft drink | 3.3 × 10-10 GL | 0.033 daL |
| A wine bottle | 7.5 × 10-10 GL | 0.075 daL |
| A bathtub | 0.00000015 GL | 15 daL |
| An Olympic swimming pool | 0.0025 GL | 250000 daL |
The gigalitre is a unit of volume equal to a billion litres, or one million cubic metres. Its symbol is GL. It is also exactly one cubic hectometre, which is the same quantity written in coherent SI form. It is the unit in which reservoirs, catchments and national water plans are counted, and it is where water measurement stops describing supply and starts describing landscape.
Dam storage is its principal use. Australian reservoir levels are published in gigalitres and as a percentage of a stated capacity in the same unit, so a city's water security can be read as a single number that changes week by week. Warragamba Dam, which supplies most of Sydney, holds a little over two thousand gigalitres when full, and the whole system a few hundred more.
Policy is written in it as well. The Murray-Darling Basin Plan set out to recover water for the environment in gigalitres, and every argument about that plan has been an argument about how many gigalitres should come out of irrigation and go back into rivers. Desalination plants are rated the same way: a large plant produces something like ninety gigalitres a year, which is a meaningful fraction of a city's demand.
Australians have an informal comparison for it. The volume of Sydney Harbour is taken as roughly five hundred gigalitres, and flood volumes, storage losses and river flows are described in harbours as casually as elsewhere they are described in swimming pools. Two thousand Olympic pools make one gigalitre, which is the more portable comparison for readers elsewhere.
The unit's identity with the cubic hectometre is worth holding on to. Spanish and Latin American hydrology publishes reservoir capacity in cubic hectometres, so a Spanish figure of 500 hm³ and an Australian figure of 500 GL describe exactly the same body of water, and any comparison between the two systems needs no arithmetic at all.
Above the gigalitre, water quantities pass to the cubic kilometre, which is a thousand of them, and are used for lakes, ice sheets and global budgets rather than for anything a government can manage. Below it, the megalitre takes over for individual farms, works and pipelines.
One gigalitre equals 1,000,000,000 litres, 1,000,000 cubic metres, 1 cubic hectometre, or about 264 million US gallons.
The decalitre is a unit of volume equal to ten litres. Its symbol is daL, and the spelling dekalitre is also accepted. It sits between the litre of the household and the hectolitre of the trade, and although it once had a settled place in European markets it is now among the least written of the metric volume units.
Its historical role was as a physical measure rather than a number. Nineteenth-century French markets sold grain, potatoes, chestnuts and dried beans out of stamped cylindrical vessels holding one decalitre, half a decalitre or a double one, and a trader's set of these was inspected and verified like a set of weights. Selling dry goods by volume was faster than weighing them and needed no balance, so the vessels did real work.
Weighing displaced it. Once cheap accurate scales became universal, dry goods moved to mass, which is fairer to the buyer because it does not depend on how densely a load happens to settle. The decalitre lost its purpose along with the practice, and the vessels survive in museums and in the vocabulary of a few older markets rather than in commerce.
The quantity itself remains perfectly ordinary. Ten litres is a large household bucket, half a jerrycan, the fuel tank of a scooter, or a fortnight of drinking water for one person. It is roughly the volume of a cubic vessel twenty-two centimetres on a side, and it weighs ten kilograms when filled with water.
What killed the unit as a written form was the same pressure that removed deca everywhere else. Metric practice steps by factors of a thousand, so litres serve until about a thousand of them and hectolitres take over for trade quantities. Ten litres is written 10 L, which is shorter than 1 daL, needs no explanation, and sorts correctly beside 5 L and 200 L in the same table.
When the unit does appear, usually in an old record or a translated document, the conversion is a single step. Multiply by ten for litres, divide by ten for hectolitres, and the resulting figure will match modern usage without any loss of precision.
One decalitre equals 10 litres, 0.1 hectolitres, about 2.64 US gallons, or about 2.2 imperial gallons.