Conversion from Mebioctets per second to Kilobits per second

Information about the Mebioctet per second (Mio/s)

The mebioctet per second is a unit of data transfer rate equal to 1,048,576 octets per second, which is 1,024 kibioctets per second. Its symbol is Mio/s. It is the unit that disc benchmarks, copy tools and backup programs report in, and one of the few binary units most people see regularly without noticing.

Storage measurement produces it naturally. A benchmark writes and reads blocks whose size is a power of two, times the operation, and divides. The result is a binary rate, and reporting it as such preserves the arithmetic. A tool that converted to decimal megaoctets would introduce a 4.9 per cent adjustment for no purpose other than to match a marketing convention.

That five per cent is exactly where the two conventions diverge visibly for consumers. A drive advertised at 550 megaoctets per second and measured at 524 mebioctets per second is performing precisely as claimed; the numbers differ only because one is decimal and the other binary. A great deal of complaint about storage performance is this arithmetic misread as a shortfall.

For everyday sizes, one mebioctet per second copies a photograph in three seconds and a two-gigaoctet film in about half an hour. Modern drives run hundreds or thousands of times faster, so the unit is now the resolution at which small differences are reported rather than the scale of the whole figure.

The unit also appears in memory and cache measurements, in database throughput reports and in the output of the low-level commands that write disc images. All of these count in binary blocks because the underlying structures are binary, and all of them report in mebioctets per second because that is what the count divided by the time actually gives.

The habit of writing the lowercase i is worth keeping. It costs one character and it tells a later reader which of two conventions produced the number, which is information that cannot be recovered from context once it has been left out.

One mebioctet per second equals 1,048,576 octets per second, 1,024 kibioctets per second, or about 1.049 megaoctets per second.

Information about the Kilobit per second (kbit/s)

The kilobit per second is a unit of data transfer rate equal to one thousand bits per second. Its symbol is kbit/s, often written kbps. It was the unit of the dial-up era, and it survives today as the unit in which audio and speech encoding rates are quoted.

The dial-up sequence is worth recalling because each number marks a technical generation. Modems ran at 300 bits per second in the late 1970s, then 1,200, 2,400, 9,600, 14,400, 28,800, 33,600 and finally 56 kilobits per second at the end of the 1990s. That last figure was the ceiling of an ordinary telephone line, set by the eight-kilohertz sampling of the digital telephone network rather than by the modem.

Audio encoding is where the unit now lives. Telephone-quality speech runs at 8 to 64 kilobits per second depending on the codec, with modern low-rate codecs producing intelligible speech at 8 and high-quality voice calls at 24 to 32. Music at 128 kilobits per second was the early standard of portable players, 192 and 256 are common, and 320 is the practical ceiling of the older lossy formats.

Those numbers reward a moment of arithmetic. Music at 128 kilobits per second is 16 kilooctets per second, so a four-minute track is about 3.8 megaoctets. Uncompressed compact-disc audio runs at 1,411 kilobits per second, so the compressed file is about a tenth the size of the original, which is the whole point of the format.

Video subtitle streams, control channels and telemetry links also work in kilobits per second. So does much of the machine-to-machine traffic that fills modern networks: a sensor reporting a reading every few seconds needs a fraction of a kilobit per second, and the protocols designed for such devices are built around keeping the radio switched off most of the time.

The unit's lower-case k marks the decimal kilo, one thousand exactly. In transmission this has never been ambiguous, because network rates have always been counted in true thousands; the binary confusion that afflicts storage units does not arise here, and a kilobit per second means the same thing in every document.

One kilobit per second equals 1,000 bits per second, 125 octets per second, or about 0.9766 kibibits per second.