| Reference | Liters (L) | Teraliters (TL) |
|---|---|---|
| A teaspoon | 0.005 L | 5 × 10-15 TL |
| A can of soft drink | 0.33 L | 3.3 × 10-13 TL |
| A wine bottle | 0.75 L | 7.5 × 10-13 TL |
| A bathtub | 150 L | 1.5 × 10-10 TL |
| An Olympic swimming pool | 2500000 L | 0.0000025 TL |
The litre is a unit of volume equal to one thousandth of a cubic metre, or exactly one cubic decimetre. Its symbol is L, and the lower-case l is also permitted. It is not part of the International System of Units, but it is accepted for use alongside it, and it is almost certainly the most widely used volume unit in the world.
It was created by the French metric law of 1795 as the volume of a cube one tenth of a metre on a side. In 1901 it was redefined as the volume occupied by one kilogram of pure water at its densest, which sounds equivalent but is not: the water definition made a litre 1.000028 cubic decimetres, and for sixty-three years precise volumetric work had to state which litre was meant. The 1964 General Conference on Weights and Measures restored the cubic decimetre and the discrepancy vanished.
The symbol has its own small history. The lower-case l is easily mistaken for the digit one in many typefaces, a genuine hazard on a medicine label or a laboratory record, so in 1979 the capital L was approved as an alternative. Both are correct, and usage splits by country rather than by discipline, with North America favouring L and much of Europe still writing l.
Its everyday reach is enormous. Fuel, milk, paint, soft drinks and engine displacement are all measured in litres, fuel consumption in most of the world is stated as litres per hundred kilometres, and cooking outside the United States works in litres and millilitres. Medicine uses it for blood volume, roughly five litres in an adult, and for lung capacity, around six.
One relationship makes it exceptionally useful. A litre of water has a mass very close to one kilogram, because the kilogram was originally defined that way, so volume and mass can be swapped in the head for most practical purposes. Rainfall follows the same logic: one millimetre of rain on one square metre is exactly one litre of water.
Against imperial and United States measures it converts untidily, which is why drink sizes differ so visibly between markets. One litre is 1.76 imperial pints but 2.11 United States liquid pints, and 0.22 imperial gallons but 0.264 United States gallons, so a gallon means two noticeably different quantities depending on where the label was printed.
One litre equals 1000 millilitres, 0.001 cubic metres, about 0.264 US gallons, or about 0.22 imperial gallons.
The teralitre is a unit of volume equal to a thousand gigalitres, or 1,000,000,000,000 litres. Its symbol is TL. It is exactly one cubic kilometre, and that is how the quantity is almost always written, because at this scale what is being measured is no longer a container but a piece of the planet.
Lakes are the obvious application. Lake Baikal holds about 23,600 cubic kilometres of fresh water, more than any other lake on earth, and Lake Superior about 12,100. Those two figures alone amount to a fifth of the world's unfrozen surface fresh water, which is the kind of statement the unit exists to make.
Rivers are described by the volume they move rather than by what they hold. The Amazon discharges roughly 6600 cubic kilometres a year into the Atlantic, more than the next several rivers combined, and total human withdrawal of fresh water from all sources runs to about 4000 cubic kilometres a year. Setting those two numbers side by side in the same unit is one of the clearest ways to state the scale of water use.
Ice is measured here too, and the numbers are larger again. The Greenland ice sheet contains close to 2.9 million cubic kilometres, and in recent decades it has been losing a few hundred each year, a figure that converts directly into millimetres of sea level because the ocean's surface area is known. The Antarctic sheet is an order of magnitude larger still.
The ocean itself sets the ceiling. All the seawater on earth amounts to about 1.335 billion cubic kilometres, so a single teralitre is roughly one billionth of it. Below the ocean, the largest managed water bodies are engineered reservoirs, and even the biggest of those hold only a few tens of cubic kilometres.
In practice the name teralitre is rare and the cubic kilometre is standard. Hydrology, glaciology and climate science all use km³, and a figure given in teralitres is more likely to come from a water utility extending its own gigalitre scale upward than from a scientific source. The two are identical, so no conversion is needed, only recognition.
One teralitre equals 1,000,000,000,000 litres, 1,000,000,000 cubic metres, 1 cubic kilometre, or 1000 gigalitres.