| Exbibits per second (Eibit/s) | Pebioctets per second (Pio/s) |
|---|---|
| 1 Exbibit per second | 128 Pio/s |
| 2 Exbibits per second | 256 Pio/s |
| 3 Exbibits per second | 384 Pio/s |
| 4 Exbibits per second | 512 Pio/s |
| 5 Exbibits per second | 640 Pio/s |
| 10 Exbibits per second | 1280 Pio/s |
| 20 Exbibits per second | 2560 Pio/s |
| 25 Exbibits per second | 3200 Pio/s |
| 50 Exbibits per second | 6400 Pio/s |
| 100 Exbibits per second | 12800 Pio/s |
| Reference | Exbibits per second (Eibit/s) | Pebioctets per second (Pio/s) |
|---|---|---|
| A dial-up modem | 4.85723 × 10-14 Eibit/s | 6.21725 × 10-12 Pio/s |
| Typical home broadband | 8.67362 × 10-11 Eibit/s | 0.0000000111022 Pio/s |
| Gigabit Ethernet | 8.67362 × 10-10 Eibit/s | 0.000000111022 Pio/s |
| Streaming a 4K film | 2.1684 × 10-11 Eibit/s | 0.00000000277556 Pio/s |
The exbibit per second is a unit of data transfer rate equal to two to the sixtieth power bits per second, which is 1,024 pebibits per second. Its symbol is Eibit/s. It is the binary counterpart of the exabit per second, and the two differ by 15.3 per cent.
That fifteen per cent is more than the margin most engineering work allows anywhere. A quantity stated in the wrong convention at this level is not slightly imprecise but plainly wrong, and no amount of context recovers the intended figure once it has been written ambiguously. This is the situation the IEC prefixes were introduced to prevent.
No physical link approaches this rate. The unit describes aggregates: the total instantaneous traffic of the whole internet is roughly an exabit per second, so a binary exbibit per second is fifteen per cent more than everything moving on every network on the planet at a given moment.
Where a binary figure of this size arises naturally is in address arithmetic rather than in transmission. Two to the sixtieth is a number that appears throughout the design of 64-bit systems, and any rate derived from filling or traversing such an address space in a fixed time is naturally binary. Those calculations are theoretical, but they are the reason the unit is defined rather than left unnamed.
In octets an exbibit per second is 144,115,188,075,855,872, or 128 pebioctets per second. That is more storage moved per second than the world manufactures in several years, which is a way of saying that no source and no destination for such a flow could exist.
For a converter the treatment is mechanical and must be exact. Eibit/s and Ebit/s differ by an eighth, and a tool that treats them as interchangeable has introduced an error larger than the difference between many neighbouring units. The lowercase i is not decoration.
One exbibit per second equals 1,024 pebibits per second, 144,115,188,075,855,872 octets per second, or about 1.153 exabits per second.
The pebioctet per second is a unit of data transfer rate equal to 1,024 tebioctets per second, or two to the fiftieth power octets per second. Its symbol is Pio/s. It is the binary counterpart of the petaoctet per second, and the two differ by 12.6 per cent.
The rate exists only as a total. The aggregate memory bandwidth of a whole supercomputer, or the summed capacity of the network fabric joining its cabinets, reaches this range, and both are sums over tens of thousands of components, each of which moves a few hundred gibioctets per second on its own.
Whether such a total means anything depends on the calculation being run. A problem that divides so that each node works mostly on its own data can use the full aggregate. A problem where every node must constantly consult every other cannot, and the machine's effective bandwidth falls to what the slowest shared path allows. Most of the art of parallel programming lies in getting problems into the first category.
In octets a pebioctet per second is 1,125,899,906,842,624, and in decimal terms about 1.126 petaoctets per second. The 12.6 per cent difference is the accumulated effect of five multiplications by 1.024, and it is now large enough that no report can leave the convention unstated without introducing real uncertainty.
The unit also appears in descriptions of parallel filesystems at the largest facilities, where a storage system spread across tens of thousands of drives delivers a few pebioctets per second to a compute cluster. That number determines how quickly the machine can checkpoint its state, which in turn determines how much work is lost when a component fails — and in a machine of that size, something is always failing.
For a converter the requirement is simply that the arithmetic be exact and the label preserved. Multiplying by 1,024 five times is not difficult; silently substituting the decimal prefix is the error to avoid.
One pebioctet per second equals 1,024 tebioctets per second, 1,125,899,906,842,624 octets per second, or about 1.126 petaoctets per second.