Conversion from 5 Megaliters to Gallons

Information about the Megaliter (ML)

The megalitre is a unit of volume equal to one million litres, or one thousand cubic metres. Its symbol is ML. It is the working unit of water management: irrigation entitlements, treatment works capacity, farm dams and the trading of water rights are all counted in megalitres, because the quantities involved are far too large for litres and awkwardly small for cubic kilometres.

Australia has made the most of it. Irrigation water in the Murray-Darling Basin is held as entitlements measured in megalitres, seasonal allocations are announced as a percentage of those entitlements, and the resulting rights are traded on an open market where prices are quoted in dollars per megalitre. That market is among the largest of its kind in the world, and every price in it is a price per million litres.

British water utilities use it for throughput. A treatment works is rated in megalitres per day, distribution zones are balanced in the same unit, and leakage is reported as megalitres lost daily across a network. Because a large city consumes several hundred megalitres a day, the unit keeps national and regional figures in three or four digits rather than in unreadable strings of zeros.

A familiar object fixes the scale. An Olympic swimming pool of fifty metres by twenty-five, filled to two metres, holds 2500 cubic metres, which is two and a half megalitres. Journalism uses that comparison constantly for reservoir levels and flood volumes, and it works precisely because the pool and the unit are within a factor of three of each other.

On farms the unit describes storage. An Australian farm dam might hold anything from five to fifty megalitres, an on-farm irrigation season is planned in megalitres per hectare, and evaporation losses from open storage are estimated the same way. Sewage treatment, industrial process water and mine site water balances all follow.

Its one hazard is typographic. In the correct symbols, mL is a millilitre and ML is a megalitre, and the two differ by a factor of a thousand million. A document that is careless about capitals can therefore turn a laboratory volume into a reservoir, which is why water and clinical writing both insist on the case being right.

One megalitre equals 1,000,000 litres, 1000 cubic metres, about 264,172 US gallons, or about 220,000 imperial gallons.

Information about the Gallon (gal)

The gallon in the imperial system is a unit of volume equal to exactly 4.54609 litres. Its symbol is gal. It contains four quarts, eight pints and 160 imperial fluid ounces, and it is about a fifth larger than the United States gallon, a difference that causes more confusion than any other single discrepancy between the two systems.

Its original definition was elegant. The Weights and Measures Act of 1824 fixed the imperial gallon as the volume occupied by ten pounds of distilled water at sixty-two degrees Fahrenheit under a barometric pressure of thirty inches of mercury. That tied liquid measure directly to the avoirdupois pound, so a gallon of water weighed ten pounds and a pint weighed a pound and a quarter. In 1985 the definition was replaced by the exact metric figure, but the old relationship still holds to within a fraction of a per cent.

Fuel economy keeps it in daily use. British and Irish drivers describe consumption in miles per gallon even though fuel has been sold in litres since the 1990s, and the figure is an imperial one. The same car scores about twenty per cent higher in British miles per gallon than in American, purely because the gallon is larger, which is why cross-Atlantic comparisons of efficiency are meaningless unless the gallon is specified.

Legal use in Britain is now narrow but real. Draught beer and cider must be sold in pints, half pints or third pints, and milk in returnable containers may be sold in pints, which keeps the whole imperial chain alive by keeping its smallest working member alive. Several Caribbean territories still sell motor fuel by the imperial gallon.

The difference from the American gallon is worth stating plainly. One imperial gallon is 4.546 litres and one United States gallon is 3.785, so an imperial gallon is 1.2 United States gallons. Recipes, fuel figures, tank capacities and chemical dilutions all break if the wrong one is assumed, and the error is large enough to matter but small enough to look plausible.

Below it the chain runs quart, pint, gill and fluid ounce, each a quarter or a fifth of the one above rather than a decimal step. That structure was designed for dividing a container by halving it repeatedly, which is a practical merit when pouring and a serious nuisance when calculating.

One imperial gallon equals 4.54609 litres, 8 imperial pints, 160 imperial fluid ounces, or about 1.201 US gallons.