Conversion from 25 Kilooctets per second to Octets per second

Information about the Kilooctet per second (ko/s)

The kilooctet per second is a unit of data transfer rate equal to one thousand octets per second, and therefore to eight kilobits per second. Its symbol is ko/s. It is the unit in which file transfers were reported through the whole of the dial-up era, and it still appears whenever a transfer is slow enough to need it.

The conversion from advertised connection speeds is the reason it matters. A 56-kilobit modem delivered about 7 kilooctets per second in practice, and users learned the relationship by watching progress bars: a one-megaoctet file took about two and a half minutes. The habit of dividing the advertised number by eight and then subtracting a bit for overhead dates from that period.

Storage devices of the era were similar. A floppy disc drive read at roughly 30 to 60 kilooctets per second, a single-speed compact-disc drive at 150, and an early hard drive at a few hundred. Loading a program from any of them was a matter of seconds to minutes, and software was written with that expectation in mind.

The unit still appears in serial communication. The classic serial port ran at rates up to 115,200 bits per second, which is 14.4 kilooctets per second, and equivalent rates are still used to talk to microcontrollers, scientific instruments and industrial equipment. A protocol designed for such a link cannot assume that a large message will arrive quickly.

It also appears at the bottom end of modern networking. A congested mobile connection, a distant satellite link or a heavily shared wireless network can fall to a few tens of kilooctets per second, and at that rate an ordinary web page — which now runs to a few megaoctets — takes a minute or more to load. The unit is a reminder of what the network assumes about its users.

For scale, one kilooctet per second moves a thousand characters of plain text each second, so a short letter transfers in a second and a novel in about ten minutes. Nothing about text has ever needed more than this; every increase in transfer rate since has been consumed by images, sound and video.

One kilooctet per second equals 1,000 octets per second, 8 kilobits per second, or about 0.9766 kibioctets per second.

Information about the Octet per second (octet/s)

The octet per second is a unit of data transfer rate equal to eight bits per second. Its symbol is octet/s. It is the unit in which software reports transfer speeds, as against the bits per second in which hardware and network services advertise them, and the factor of eight between the two conventions is the source of endless confusion.

The division of labour is consistent once it is understood. Anything describing a physical link — an Ethernet port, a fibre connection, a radio channel, a broadband package — is quoted in bits per second, because bits are what the signalling actually carries. Anything describing a file moving from one place to another is quoted in octets per second, because files are measured in octets.

A download manager that reports 12 megaoctets per second on a connection sold as 100 megabits per second is not disagreeing with the advertisement; it is stating the same rate in the other convention, and the arithmetic between them is a division by eight. Recognising this immediately removes the most common cause of complaint about internet speed.

Individual octets per second appear in the same narrow places as individual bits: deep-space telemetry, low-power sensor links, and the slowest legacy serial connections. A rate of a hundred octets per second would move a page of text in about twenty seconds, which was a normal experience in the 1970s and is unimaginable now.

The unit also underlies the way disc and interface throughput is described. A drive that sustains 500 megaoctets per second is moving four gigabits per second across its interface, and matching the two figures is a routine part of system design: an interface rated in gigabits must be compared with a drive rated in octets, and the factor of eight decides whether one starves the other.

Storage tools reinforce the convention. Every file copy utility, backup program and command-line transfer tool reports in octets per second or its multiples, and every network measurement tool reports in bits per second. A person reading both at once has to keep the conversion in mind, which is exactly what makes the distinction worth stating explicitly.

One octet per second equals 8 bits per second, 0.008 kilobits per second, or 0.001 kilooctets per second.