| Cubic millimeters (mm³) | Microliters (µL) |
|---|---|
| 1 Cubic millimeter | 1 µL |
| 2 Cubic millimeters | 2 µL |
| 3 Cubic millimeters | 3 µL |
| 4 Cubic millimeters | 4 µL |
| 5 Cubic millimeters | 5 µL |
| 10 Cubic millimeters | 10 µL |
| 20 Cubic millimeters | 20 µL |
| 25 Cubic millimeters | 25 µL |
| 50 Cubic millimeters | 50 µL |
| 100 Cubic millimeters | 100 µL |
| Reference | Cubic millimeters (mm³) | Microliters (µL) |
|---|---|---|
| A teaspoon | 5000 mm³ | 5000 µL |
| A can of soft drink | 330000 mm³ | 330000 µL |
| A wine bottle | 750000 mm³ | 750000 µL |
| A bathtub | 150000000 mm³ | 150000000 µL |
| An Olympic swimming pool | 2.5 × 1012 mm³ | 2.5 × 1012 µL |
The cubic millimetre is a unit of volume equal to one thousandth of a cubic centimetre, written mm³. It is the volume of a cube one millimetre on each side, and it is exactly one microlitre. Which of the two names is used depends on whether the thing being measured is a solid or a liquid, and the distinction is entirely a matter of professional habit.
Machining measures productivity in it. The material removal rate of a milling cutter or a grinding wheel is quoted in cubic millimetres per minute, and that single figure captures what a machine and a tool can achieve better than spindle speed or feed rate can on their own. Comparing two cutting strategies, two tool coatings or two machines means comparing how many cubic millimetres of metal each turns into swarf per unit time.
Additive manufacturing inverts the same measurement. A fused-filament printer deposits ten to twenty cubic millimetres a second, a laser powder-bed machine rather less, and build time follows directly from the part volume divided by that rate. Because the volume of a component is known exactly from its model, the estimate is unusually reliable.
Wear and durability testing uses the unit to describe loss. A specific wear rate is stated in cubic millimetres removed per newton of load and metre of sliding, which allows materials of very different hardness to be compared on one scale. Bearing life, brake pad testing and coating evaluation all reduce to counting cubic millimetres that are no longer there.
Medical imaging works at the same magnitude. Micro-computed tomography of bone reports trabecular volume and porosity in cubic millimetres, tumour volumes in early imaging are given the same way, and voxel sizes in high-resolution scans are quoted as fractions of one. In each case the unit is small enough to describe structure rather than merely size.
Its identity with the microlitre is worth remembering when moving between fields. An engineer discussing a cubic millimetre of material and a biologist discussing a microlitre of solution are talking about the same quantity, and any calculation that mixes the two needs no conversion factor at all.
One cubic millimetre equals 1 microlitre, 0.001 cubic centimetres, 0.000000001 cubic metres, or about 0.000061 cubic inches.
The microlitre is a unit of volume equal to one millionth of a litre, written µL. It is exactly one cubic millimetre. It is the working unit of the molecular biology laboratory and of clinical haematology, and almost every quantity in modern biological science that is not a mass or a concentration is a number of microlitres.
Pipetting is what defines it in practice. Adjustable micropipettes are named after their maximum volume in microlitres, so a bench holds instruments of 2, 20, 200 and 1000, and a researcher's day consists largely of moving microlitres from one tube to another. A polymerase chain reaction is typically assembled in twenty to fifty microlitres, and a whole experiment may use less liquid than a teaspoon holds.
Blood counts are reported against it. White cells number between four thousand and eleven thousand per microlitre in a healthy adult, platelets between a hundred and fifty thousand and four hundred thousand, and red cells about five million. Those reference ranges are among the most widely used numbers in medicine, and all of them are counts within a cube one millimetre on a side.
Diagnostics has driven the volumes down. A modern blood glucose meter needs about half a microlitre of blood, which is why a finger-prick sample is enough where an earlier generation of instruments needed a syringe. Point-of-care analysers, lateral flow tests and microfluidic cartridges are all designed around the smallest sample a patient can be asked to give.
Analytical chemistry uses the same scale. Injection volumes in liquid chromatography run from one to twenty microlitres, gas chromatography uses one or less, and mass spectrometry samples are prepared in tens. Because the analytical signal depends on the amount injected, the accuracy of a microlitre-scale measurement sets the accuracy of the whole result.
The identity with the cubic millimetre is a genuine convenience. Haematology once reported cell counts per cubic millimetre and now reports them per microlitre, and the numbers did not change at all, because the two units are the same. That is a rare case of a unit change in medicine that required no re-education and produced no errors.
One microlitre equals 1 cubic millimetre, 0.001 millilitres, 0.000001 litres, or about 0.0000338 US fluid ounces.