| Cubic millimeters (mm³) | Megaliters (ML) |
|---|---|
| 1 Cubic millimeter | 1 × 10-12 ML |
| 2 Cubic millimeters | 2 × 10-12 ML |
| 3 Cubic millimeters | 3 × 10-12 ML |
| 4 Cubic millimeters | 4 × 10-12 ML |
| 5 Cubic millimeters | 5 × 10-12 ML |
| 10 Cubic millimeters | 1 × 10-11 ML |
| 20 Cubic millimeters | 2 × 10-11 ML |
| 25 Cubic millimeters | 2.5 × 10-11 ML |
| 50 Cubic millimeters | 5 × 10-11 ML |
| 100 Cubic millimeters | 1 × 10-10 ML |
| Reference | Cubic millimeters (mm³) | Megaliters (ML) |
|---|---|---|
| A teaspoon | 5000 mm³ | 0.000000005 ML |
| A can of soft drink | 330000 mm³ | 0.00000033 ML |
| A wine bottle | 750000 mm³ | 0.00000075 ML |
| A bathtub | 150000000 mm³ | 0.00015 ML |
| An Olympic swimming pool | 2.5 × 1012 mm³ | 2.5 ML |
The cubic millimetre is a unit of volume equal to one thousandth of a cubic centimetre, written mm³. It is the volume of a cube one millimetre on each side, and it is exactly one microlitre. Which of the two names is used depends on whether the thing being measured is a solid or a liquid, and the distinction is entirely a matter of professional habit.
Machining measures productivity in it. The material removal rate of a milling cutter or a grinding wheel is quoted in cubic millimetres per minute, and that single figure captures what a machine and a tool can achieve better than spindle speed or feed rate can on their own. Comparing two cutting strategies, two tool coatings or two machines means comparing how many cubic millimetres of metal each turns into swarf per unit time.
Additive manufacturing inverts the same measurement. A fused-filament printer deposits ten to twenty cubic millimetres a second, a laser powder-bed machine rather less, and build time follows directly from the part volume divided by that rate. Because the volume of a component is known exactly from its model, the estimate is unusually reliable.
Wear and durability testing uses the unit to describe loss. A specific wear rate is stated in cubic millimetres removed per newton of load and metre of sliding, which allows materials of very different hardness to be compared on one scale. Bearing life, brake pad testing and coating evaluation all reduce to counting cubic millimetres that are no longer there.
Medical imaging works at the same magnitude. Micro-computed tomography of bone reports trabecular volume and porosity in cubic millimetres, tumour volumes in early imaging are given the same way, and voxel sizes in high-resolution scans are quoted as fractions of one. In each case the unit is small enough to describe structure rather than merely size.
Its identity with the microlitre is worth remembering when moving between fields. An engineer discussing a cubic millimetre of material and a biologist discussing a microlitre of solution are talking about the same quantity, and any calculation that mixes the two needs no conversion factor at all.
One cubic millimetre equals 1 microlitre, 0.001 cubic centimetres, 0.000000001 cubic metres, or about 0.000061 cubic inches.
The megalitre is a unit of volume equal to one million litres, or one thousand cubic metres. Its symbol is ML. It is the working unit of water management: irrigation entitlements, treatment works capacity, farm dams and the trading of water rights are all counted in megalitres, because the quantities involved are far too large for litres and awkwardly small for cubic kilometres.
Australia has made the most of it. Irrigation water in the Murray-Darling Basin is held as entitlements measured in megalitres, seasonal allocations are announced as a percentage of those entitlements, and the resulting rights are traded on an open market where prices are quoted in dollars per megalitre. That market is among the largest of its kind in the world, and every price in it is a price per million litres.
British water utilities use it for throughput. A treatment works is rated in megalitres per day, distribution zones are balanced in the same unit, and leakage is reported as megalitres lost daily across a network. Because a large city consumes several hundred megalitres a day, the unit keeps national and regional figures in three or four digits rather than in unreadable strings of zeros.
A familiar object fixes the scale. An Olympic swimming pool of fifty metres by twenty-five, filled to two metres, holds 2500 cubic metres, which is two and a half megalitres. Journalism uses that comparison constantly for reservoir levels and flood volumes, and it works precisely because the pool and the unit are within a factor of three of each other.
On farms the unit describes storage. An Australian farm dam might hold anything from five to fifty megalitres, an on-farm irrigation season is planned in megalitres per hectare, and evaporation losses from open storage are estimated the same way. Sewage treatment, industrial process water and mine site water balances all follow.
Its one hazard is typographic. In the correct symbols, mL is a millilitre and ML is a megalitre, and the two differ by a factor of a thousand million. A document that is careless about capitals can therefore turn a laboratory volume into a reservoir, which is why water and clinical writing both insist on the case being right.
One megalitre equals 1,000,000 litres, 1000 cubic metres, about 264,172 US gallons, or about 220,000 imperial gallons.