| Gallons (gal) | Microliters (µL) |
|---|---|
| 1 Gallon | 4546090 µL |
| 2 Gallons | 9092180 µL |
| 3 Gallons | 13638270 µL |
| 4 Gallons | 18184360 µL |
| 5 Gallons | 22730450 µL |
| 10 Gallons | 45460900 µL |
| 20 Gallons | 90921800 µL |
| 25 Gallons | 113652250 µL |
| 50 Gallons | 227304500 µL |
| 100 Gallons | 454609000 µL |
| Reference | Gallons (gal) | Microliters (µL) |
|---|---|---|
| A teaspoon | 0.00109985 gal | 5000 µL |
| A can of soft drink | 0.0725899 gal | 330000 µL |
| A wine bottle | 0.164977 gal | 750000 µL |
| A bathtub | 32.9954 gal | 150000000 µL |
| An Olympic swimming pool | 549923 gal | 2.5 × 1012 µL |
The gallon in the imperial system is a unit of volume equal to exactly 4.54609 litres. Its symbol is gal. It contains four quarts, eight pints and 160 imperial fluid ounces, and it is about a fifth larger than the United States gallon, a difference that causes more confusion than any other single discrepancy between the two systems.
Its original definition was elegant. The Weights and Measures Act of 1824 fixed the imperial gallon as the volume occupied by ten pounds of distilled water at sixty-two degrees Fahrenheit under a barometric pressure of thirty inches of mercury. That tied liquid measure directly to the avoirdupois pound, so a gallon of water weighed ten pounds and a pint weighed a pound and a quarter. In 1985 the definition was replaced by the exact metric figure, but the old relationship still holds to within a fraction of a per cent.
Fuel economy keeps it in daily use. British and Irish drivers describe consumption in miles per gallon even though fuel has been sold in litres since the 1990s, and the figure is an imperial one. The same car scores about twenty per cent higher in British miles per gallon than in American, purely because the gallon is larger, which is why cross-Atlantic comparisons of efficiency are meaningless unless the gallon is specified.
Legal use in Britain is now narrow but real. Draught beer and cider must be sold in pints, half pints or third pints, and milk in returnable containers may be sold in pints, which keeps the whole imperial chain alive by keeping its smallest working member alive. Several Caribbean territories still sell motor fuel by the imperial gallon.
The difference from the American gallon is worth stating plainly. One imperial gallon is 4.546 litres and one United States gallon is 3.785, so an imperial gallon is 1.2 United States gallons. Recipes, fuel figures, tank capacities and chemical dilutions all break if the wrong one is assumed, and the error is large enough to matter but small enough to look plausible.
Below it the chain runs quart, pint, gill and fluid ounce, each a quarter or a fifth of the one above rather than a decimal step. That structure was designed for dividing a container by halving it repeatedly, which is a practical merit when pouring and a serious nuisance when calculating.
One imperial gallon equals 4.54609 litres, 8 imperial pints, 160 imperial fluid ounces, or about 1.201 US gallons.
The microlitre is a unit of volume equal to one millionth of a litre, written µL. It is exactly one cubic millimetre. It is the working unit of the molecular biology laboratory and of clinical haematology, and almost every quantity in modern biological science that is not a mass or a concentration is a number of microlitres.
Pipetting is what defines it in practice. Adjustable micropipettes are named after their maximum volume in microlitres, so a bench holds instruments of 2, 20, 200 and 1000, and a researcher's day consists largely of moving microlitres from one tube to another. A polymerase chain reaction is typically assembled in twenty to fifty microlitres, and a whole experiment may use less liquid than a teaspoon holds.
Blood counts are reported against it. White cells number between four thousand and eleven thousand per microlitre in a healthy adult, platelets between a hundred and fifty thousand and four hundred thousand, and red cells about five million. Those reference ranges are among the most widely used numbers in medicine, and all of them are counts within a cube one millimetre on a side.
Diagnostics has driven the volumes down. A modern blood glucose meter needs about half a microlitre of blood, which is why a finger-prick sample is enough where an earlier generation of instruments needed a syringe. Point-of-care analysers, lateral flow tests and microfluidic cartridges are all designed around the smallest sample a patient can be asked to give.
Analytical chemistry uses the same scale. Injection volumes in liquid chromatography run from one to twenty microlitres, gas chromatography uses one or less, and mass spectrometry samples are prepared in tens. Because the analytical signal depends on the amount injected, the accuracy of a microlitre-scale measurement sets the accuracy of the whole result.
The identity with the cubic millimetre is a genuine convenience. Haematology once reported cell counts per cubic millimetre and now reports them per microlitre, and the numbers did not change at all, because the two units are the same. That is a rare case of a unit change in medicine that required no re-education and produced no errors.
One microlitre equals 1 cubic millimetre, 0.001 millilitres, 0.000001 litres, or about 0.0000338 US fluid ounces.