Conversion from US Dry pints to Cubic feet

Information about the US Dry pint (pt)

The United States dry pint is a unit of volume equal to 550.610471 millilitres, or 33.6 cubic inches. Its symbol is pt. It belongs to a separate American measuring system used for produce and grain rather than for liquids, and it is about sixteen per cent larger than the United States liquid pint of 473 millilitres.

Two parallel chains exist because two kinds of goods were once measured differently. Liquids descend from the wine gallon of 231 cubic inches, while dry goods descend from the Winchester bushel of 2150.42 cubic inches, a corn measure standardised in medieval England. Dividing the bushel by four gives a peck, by thirty-two a dry quart, and by sixty-four a dry pint, and none of those figures has any relation to the liquid chain.

Berries are where the unit is still met. Blueberries, raspberries and strawberries are sold in American markets in pint and quart baskets, and the basket is a dry measure. A pint of blueberries is therefore 551 millilitres of fruit, not 473, and a shopper comparing that basket with a pint of cream is comparing two different quantities under one name.

Nothing on a label resolves the ambiguity. Both are written pt, both are called a pint, and the word gives no clue as to which chain is meant. In practice the contents decide: if it pours, it is liquid measure, and if it is heaped, it is dry. That rule is reliable but it is nowhere written down, which is why converted American recipes so often disagree with one another.

Its existence is a survival from selling by bulk. Before cheap accurate scales, grain, apples, potatoes and shellfish were sold by filling a stamped measure and levelling it off, and the whole dry chain from bushel down to pint served that trade. Almost all of it has now been replaced by weight, and United States produce regulations increasingly specify pounds instead.

For conversion, the safest approach is to abandon the name entirely. A dry pint is 551 millilitres, a dry quart 1101, a peck 8.81 litres and a bushel 35.24. Writing the metric figure removes an ambiguity that the English word carries and cannot shed.

One United States dry pint equals 550.61 millilitres, 33.6 cubic inches, half a US dry quart, or about 1.164 US liquid pints.

Information about the Cubic foot (ft³)

The cubic foot is a unit of volume equal to 1728 cubic inches, or 28.3168 litres. Its symbol is cu ft, sometimes written ft³. It is the volume of a cube one foot on each side, and it is the unit in which the United States measures natural gas, appliance capacity and air flow, three fields with almost nothing else in common.

Natural gas is its largest use by far. American gas meters record consumption in hundreds of cubic feet, bills are issued in thousands, and national reserves are quoted in trillions. Because the energy in a given volume of gas depends on its composition, utilities also publish a heating value per cubic foot, and the bill is the product of the two.

Appliances are sized in it. Refrigerator and freezer capacity in the United States is quoted in cubic feet, so a family refrigerator is about twenty and a chest freezer perhaps seven, and the same convention covers microwave ovens, washing machines and truck cargo boxes. Shoppers compare products by a number that describes usable space rather than external dimensions, which is genuinely more useful.

Air movement uses it per unit time. Fans, extractors, air conditioners and compressors are rated in cubic feet per minute, a figure abbreviated to CFM in every American catalogue. Ventilation standards are written as required air changes, which convert to cubic feet per minute once the room volume is known, so the unit sits on both sides of the calculation.

Materials and freight follow the same scale. Concrete, gravel, mulch and topsoil are sold by the cubic foot in smaller quantities and by the cubic yard in larger ones, twenty-seven cubic feet making one cubic yard. A cubic foot of fresh water weighs 62.4 pounds and holds about 7.48 United States gallons, which are the two figures most often needed alongside it.

Its metric equivalent is not memorable, at 28.3168 litres or 0.0283 cubic metres, and neither is its relationship to the cubic inch, at 1728. Those factors are why engineering outside the United States moved to metric volumes early even where lengths stayed imperial for longer.

One cubic foot equals 1728 cubic inches, about 28.317 litres, about 7.48 US gallons, or about 0.0283 cubic metres.