Foot (ft)

The foot is a unit of length equal to exactly 0.3048 metres, or twelve inches. Its plural is feet and its symbol is ft, though a single prime is used in technical drawing and a straight apostrophe informally.

Units based on the human foot appear across the ancient world, and their lengths varied considerably. The Roman pes measured about 296 millimetres and was divided into twelve unciae, an arrangement English inherited directly. Medieval Europe supported dozens of local feet, and a merchant crossing a few borders might encounter several. The English foot was standardised in stages, but its exact modern value dates only from the International Yard and Pound Agreement of 1959.

Aviation is the foot's most significant surviving international domain. Aircraft altitude is reported in feet almost everywhere, and flight levels are expressed in hundreds of feet, so FL350 means 35,000 feet. Russia and China historically used metres, and China's transition to feet for most flight levels in 2011 removed a genuine safety hazard at the boundaries of adjoining airspace. Vertical separation standards are defined in feet, and reduced vertical separation minima allow 1000 feet between aircraft above 29,000 feet.

Construction in the United States works in feet and inches throughout, and lumber, ceiling heights and room dimensions all follow. Broadcasting and film retain the foot for lens focus scales and for measuring film stock. Water depth in diving is given in feet in American practice and metres elsewhere, a divergence that dive computers accommodate by offering both.

Twelve as a divisor is the foot's practical strength. It divides evenly by two, three, four and six, which suits carpentry and layout work where thirds and quarters are common. A decimal unit divides cleanly only by two and five.

Water and timber keep two of its derivatives alive. The fathom, six feet, measured the depth of water for as long as a sounding line was thrown by hand, and old charts are still marked in fathoms even where new ones use metres. The board foot, a volume of one foot square by one inch thick, remains the trading unit of sawn timber in North America, so a lumber yard quotes prices per thousand board feet. Both illustrate a general habit of the imperial system: rather than adding prefixes, it names each new quantity after the job it does, which makes the units memorable to those who use them and opaque to everyone else.

One foot equals 12 inches, 0.3048 metres, or 30.48 centimetres exactly.

Foot conversion table