| Reference | Feet (ft) | Inches (in) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.974409 ft | 11.6929 in |
| Average adult human height | 5.57743 ft | 66.9291 in |
| A football pitch (length) | 344.488 ft | 4133.86 in |
| A marathon | 138435 ft | 1661220 in |
| Height of Mount Everest | 29032.2 ft | 348386 in |
The foot is a unit of length equal to exactly 0.3048 metres, or twelve inches. Its plural is feet and its symbol is ft, though a single prime is used in technical drawing and a straight apostrophe informally.
Units based on the human foot appear across the ancient world, and their lengths varied considerably. The Roman pes measured about 296 millimetres and was divided into twelve unciae, an arrangement English inherited directly. Medieval Europe supported dozens of local feet, and a merchant crossing a few borders might encounter several. The English foot was standardised in stages, but its exact modern value dates only from the International Yard and Pound Agreement of 1959.
Aviation is the foot's most significant surviving international domain. Aircraft altitude is reported in feet almost everywhere, and flight levels are expressed in hundreds of feet, so FL350 means 35,000 feet. Russia and China historically used metres, and China's transition to feet for most flight levels in 2011 removed a genuine safety hazard at the boundaries of adjoining airspace. Vertical separation standards are defined in feet, and reduced vertical separation minima allow 1000 feet between aircraft above 29,000 feet.
Construction in the United States works in feet and inches throughout, and lumber, ceiling heights and room dimensions all follow. Broadcasting and film retain the foot for lens focus scales and for measuring film stock. Water depth in diving is given in feet in American practice and metres elsewhere, a divergence that dive computers accommodate by offering both.
Twelve as a divisor is the foot's practical strength. It divides evenly by two, three, four and six, which suits carpentry and layout work where thirds and quarters are common. A decimal unit divides cleanly only by two and five.
Water and timber keep two of its derivatives alive. The fathom, six feet, measured the depth of water for as long as a sounding line was thrown by hand, and old charts are still marked in fathoms even where new ones use metres. The board foot, a volume of one foot square by one inch thick, remains the trading unit of sawn timber in North America, so a lumber yard quotes prices per thousand board feet. Both illustrate a general habit of the imperial system: rather than adding prefixes, it names each new quantity after the job it does, which makes the units memorable to those who use them and opaque to everyone else.
One foot equals 12 inches, 0.3048 metres, or 30.48 centimetres exactly.
The inch is a unit of length equal to exactly 25.4 millimetres. It is one twelfth of a foot and one thirty-sixth of a yard. The symbol is in, though a double prime is common in technical contexts and a straight double quote is often substituted informally.
The name comes from the Latin uncia, meaning a twelfth part, which also gave English the word ounce. Early definitions were anatomical or agricultural. A statute of Edward II defined the inch as three barleycorns laid end to end, and the width of a man's thumb served as a working approximation in several European languages. Dutch and Swedish still use words for inch that mean thumb.
Its modern precision dates from 1959, when the International Yard and Pound Agreement fixed the yard at exactly 0.9144 metres across the United States, the United Kingdom, Canada, Australia, New Zealand and South Africa. Before that agreement the American and British inches differed very slightly, which mattered in precision manufacturing. The United States retained a separate survey inch for land measurement until it was formally retired at the end of 2022.
The inch remains dominant in several international industries regardless of local measurement systems. Screen sizes are quoted in inches worldwide, measured diagonally. Tyre rim diameters, bicycle wheel sizes, plumbing pipe bores and rack-mounted equipment all use inch designations, and the standard 19-inch rack is a global fixture. Photographic sensor sizes use inch fractions that no longer correspond to any real dimension, a survival from television camera tube measurements.
Subdivision is traditionally binary rather than decimal. An inch is halved repeatedly into eighths, sixteenths and thirty-seconds, which suits ruler markings and fits the fractional sizing of drill bits and spanners. Decimal inches are used in machining, where thousandths of an inch are called thou or mils.
Screens and printing keep it in daily use far outside the countries that use it for anything else. Televisions, monitors and phones are sold by the diagonal in inches everywhere, so a 55-inch television has the same name in Paris as in Chicago. Typography rests on the same base: there are 72 points to the inch, a convention inherited from the printing trade and written into every computer font system, and image resolution is quoted in dots or pixels per inch. Anyone laying out a page in a country that has been metric for a century is therefore working, without particular thought, in twelfths and seventy-seconds of an inch.
One inch equals 25.4 millimetres, 2.54 centimetres, or 0.0254 metres exactly.