Conversion from Exabits per second to Gibioctets per second

Information about the Exabit per second (Ebit/s)

The exabit per second is a unit of data transfer rate equal to a thousand petabits per second. Its symbol is Ebit/s. No link, no cable and no exchange point runs at this rate; the unit describes the internet as a whole, or a large part of it, at a single instant.

Global internet traffic can be expressed this way. Worldwide traffic of several hundred exaoctets a month works out to roughly one exabit per second on average, and peak hours run higher. That figure is the sum of every packet moving on every network on the planet, and it is the only quantity anyone routinely describes at this scale.

An exabit per second is 125 petaoctets per second. Nothing generates data at that rate in one place; the number is an aggregate of billions of separate flows, most of them tiny. A single video stream is a few megabits per second, so an exabit per second is on the order of a hundred million such streams running at once.

The composition of that traffic is dominated by video. Streaming services account for the largest share, followed by social platforms, software updates and cloud synchronisation. Ordinary web browsing and messaging, which people think of as the internet, are a small fraction of the total by volume even though they occupy most of the attention.

The unit also appears in projections of aggregate capacity. The total installed capacity of all submarine cables, if every wavelength on every fibre pair were lit and used simultaneously, is in the exabit-per-second range. Actual utilisation is far below that, because capacity is built ahead of demand and because routes must carry each other's traffic when a cable fails.

The prefix exa is a thousand to the sixth power. It was adopted in 1975, when nobody expected it to describe anything but astronomical quantities, and it now describes the working throughput of a communications system built by human beings. The interval between definition and everyday use was about forty years.

One exabit per second equals 1,000 petabits per second, 125 petaoctets per second, or about 0.8674 exbibits per second.

Information about the Gibioctet per second (Gio/s)

The gibioctet per second is a unit of data transfer rate equal to 1,073,741,824 octets per second, which is 1,024 mebioctets per second. Its symbol is Gio/s. It is the unit of memory bandwidth and of the fastest storage interfaces, and the binary counterpart of the gigaoctet per second, from which it differs by 7.4 per cent.

Memory is where the unit belongs most naturally. A memory channel transfers a fixed number of octets per clock cycle, and that number is a power of two, so the resulting bandwidth is a binary multiple of the clock frequency. A machine with several channels reaches tens of gibioctets per second, and an accelerator with stacked memory reaches thousands.

Storage has caught up. A fast solid-state drive on the current interface sustains several gibioctets per second, which means that for the first time the drive and the memory are within an order of magnitude of each other. That convergence has changed how software is written: the old assumption that reading from disc is thousands of times slower than reading from memory no longer holds.

The unit appears in benchmark output, in system monitoring displays and in the specifications of processor interconnects. All of these count in binary because the structures they measure are binary, and reporting the result with a decimal prefix would introduce a seven per cent error for the sake of a familiar-looking label.

For a sense of what the rate means, one gibioctet per second copies a two-gigaoctet film in under two seconds and fills a one-teraoctet drive in about a quarter of an hour. Anything at this speed is faster than every external connection in an ordinary building, so the limiting factor moves inside the machine.

The distinction from the decimal unit matters most in procurement and capacity planning. A specification that requires 10 gigaoctets per second and a system that delivers 10 gibioctets per second are not the same, and the difference of 7.4 per cent is the sort of margin that decides whether a design meets its requirement.

One gibioctet per second equals 1,073,741,824 octets per second, 1,024 mebioctets per second, or about 1.074 gigaoctets per second.