Conversion from Decameters to Feet

Information about the Decameter (dam)

The decametre is ten metres, written dam. It is a valid SI unit formed with the prefix deca, but like the decimetre it is rarely used. The prefix deca is the only SI multiplier whose symbol is two letters, which makes it slightly awkward to write and may have contributed to its neglect.

Spelling varies. Decametre is the international form; dekameter appears in some American texts, and the symbol dkm is occasionally seen in older material, though dam is the form recognised by the BIPM. The similarity between dam and the abbreviation for decimetre has caused confusion, and some standards bodies discourage the unit for that reason alone.

Where it does appear, it is usually in surveying, forestry and agronomy. Field dimensions, plot spacing and tree heights sit conveniently in the range of a few decametres. Some European cadastral records use the unit. It also occurs in specifications for cable and hose supplied in ten-metre lengths.

The derived area unit is more familiar than the length unit. A square decametre is 100 square metres, which is exactly one are. The are is itself little used, but its hundredfold multiple, the hectare, is the standard measure of land area across most of the world. A hectare is 100 ares, or 10,000 square metres, and can equally be described as a square hectometre.

In practice most people express ten metres simply as ten metres, or as 0.01 kilometres when working at larger scales. The decametre is best understood as a formally correct unit that everyday usage has passed over.

The unit does appear in one everyday context without being named. Swimming pool lane lengths, running track segments and the spacing of street lighting are frequently set in multiples of ten metres. Planning documents that lay out plot frontages or building setbacks often work to the same grid. The quantity is useful; it is only the word that has fallen out of use.

Its square has fared better than the length itself. The are, a hundred square metres, is the square decametre under another name, and although the are is now rare its hundredfold the hectare governs land measurement across most of the world. The same pattern shows in the decare of a thousand square metres, which is the standard unit of farmland in Turkey, Greece, Norway and parts of the Balkans and is simply ten ares. So the decametre survives chiefly by inheritance: nobody quotes a field boundary in decametres, but a great deal of the world's land is bought and sold in units built from it.

One decametre equals 10 metres, 1000 centimetres, or 0.01 kilometres. It is about 32.8084 feet.

Information about the Foot (ft)

The foot is a unit of length equal to exactly 0.3048 metres, or twelve inches. Its plural is feet and its symbol is ft, though a single prime is used in technical drawing and a straight apostrophe informally.

Units based on the human foot appear across the ancient world, and their lengths varied considerably. The Roman pes measured about 296 millimetres and was divided into twelve unciae, an arrangement English inherited directly. Medieval Europe supported dozens of local feet, and a merchant crossing a few borders might encounter several. The English foot was standardised in stages, but its exact modern value dates only from the International Yard and Pound Agreement of 1959.

Aviation is the foot's most significant surviving international domain. Aircraft altitude is reported in feet almost everywhere, and flight levels are expressed in hundreds of feet, so FL350 means 35,000 feet. Russia and China historically used metres, and China's transition to feet for most flight levels in 2011 removed a genuine safety hazard at the boundaries of adjoining airspace. Vertical separation standards are defined in feet, and reduced vertical separation minima allow 1000 feet between aircraft above 29,000 feet.

Construction in the United States works in feet and inches throughout, and lumber, ceiling heights and room dimensions all follow. Broadcasting and film retain the foot for lens focus scales and for measuring film stock. Water depth in diving is given in feet in American practice and metres elsewhere, a divergence that dive computers accommodate by offering both.

Twelve as a divisor is the foot's practical strength. It divides evenly by two, three, four and six, which suits carpentry and layout work where thirds and quarters are common. A decimal unit divides cleanly only by two and five.

Water and timber keep two of its derivatives alive. The fathom, six feet, measured the depth of water for as long as a sounding line was thrown by hand, and old charts are still marked in fathoms even where new ones use metres. The board foot, a volume of one foot square by one inch thick, remains the trading unit of sawn timber in North America, so a lumber yard quotes prices per thousand board feet. Both illustrate a general habit of the imperial system: rather than adding prefixes, it names each new quantity after the job it does, which makes the units memorable to those who use them and opaque to everyone else.

One foot equals 12 inches, 0.3048 metres, or 30.48 centimetres exactly.