Conversion from Cubic meters to Microliters

=

Invert

Formula to convert Cubic meters (m³) to Microliters (µL)

More information

Cubic meters to Microliters conversion table

Cubic meters (m³)Microliters (µL)
1 Cubic meter1000000000 µL
2 Cubic meters2000000000 µL
3 Cubic meters3000000000 µL
4 Cubic meters4000000000 µL
5 Cubic meters5000000000 µL
10 Cubic meters10000000000 µL
20 Cubic meters20000000000 µL
25 Cubic meters25000000000 µL
50 Cubic meters50000000000 µL
100 Cubic meters100000000000 µL

Volume reference points

ReferenceCubic meters (m³)Microliters (µL)
A teaspoon0.000005 m³5000 µL
A can of soft drink0.00033 m³330000 µL
A wine bottle0.00075 m³750000 µL
A bathtub0.15 m³150000000 µL
An Olympic swimming pool2500 m³2.5 × 1012 µL

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Cubic meter (m³)

The cubic metre is the SI unit of volume, written m³. It is the volume of a cube one metre on each side, and because the metre is a base unit, every other volume unit in the system is derived from it. It holds a thousand litres, and a cubic metre of fresh water has a mass of very nearly one tonne, which is the single most useful fact about it.

Utilities are billed in it. Domestic water meters almost everywhere record consumption in cubic metres, and a household of four uses somewhere between 100 and 200 of them a year. Natural gas is metered the same way and then converted to energy for billing, because the heat released by a cubic metre of gas depends on its composition and has to be corrected for temperature and pressure at the meter.

Construction orders materials by it. Ready-mixed concrete is sold and delivered by the cubic metre, a standard truck carrying six to eight; excavation and earthworks are priced per cubic metre moved; and sawn timber, aggregate, topsoil and bark are all traded the same way. Because a cubic metre of concrete weighs about 2.4 tonnes, the unit also decides what a lorry or a crane can carry.

Freight uses it in a more subtle way. Shipping and removals quote volume in cubic metres, and air freight charges by whichever is greater, the actual mass or a volumetric mass calculated at a fixed ratio, commonly 167 kilograms to the cubic metre. Light bulky cargo is therefore priced by the space it occupies rather than by what it weighs, and the whole calculation runs on this unit.

Environmental measurement lives here too. River flow is given in cubic metres per second, reservoir capacity in millions of cubic metres, air quality as micrograms of pollutant per cubic metre of air, and ventilation as cubic metres per hour. A room four metres by five with a ceiling at two and a half holds fifty cubic metres of air, which is the sort of figure ventilation standards are written against.

Against imperial and United States units it converts to 35.315 cubic feet or 1.308 cubic yards. The cubic yard matters most in practice, because American concrete and excavation are ordered in it, and the two units are close enough that a mistaken figure looks plausible while being a third out.

One cubic metre equals 1000 litres, about 35.315 cubic feet, about 1.308 cubic yards, or about 264.2 US gallons.


Information about the Microliter (µL)

The microlitre is a unit of volume equal to one millionth of a litre, written µL. It is exactly one cubic millimetre. It is the working unit of the molecular biology laboratory and of clinical haematology, and almost every quantity in modern biological science that is not a mass or a concentration is a number of microlitres.

Pipetting is what defines it in practice. Adjustable micropipettes are named after their maximum volume in microlitres, so a bench holds instruments of 2, 20, 200 and 1000, and a researcher's day consists largely of moving microlitres from one tube to another. A polymerase chain reaction is typically assembled in twenty to fifty microlitres, and a whole experiment may use less liquid than a teaspoon holds.

Blood counts are reported against it. White cells number between four thousand and eleven thousand per microlitre in a healthy adult, platelets between a hundred and fifty thousand and four hundred thousand, and red cells about five million. Those reference ranges are among the most widely used numbers in medicine, and all of them are counts within a cube one millimetre on a side.

Diagnostics has driven the volumes down. A modern blood glucose meter needs about half a microlitre of blood, which is why a finger-prick sample is enough where an earlier generation of instruments needed a syringe. Point-of-care analysers, lateral flow tests and microfluidic cartridges are all designed around the smallest sample a patient can be asked to give.

Analytical chemistry uses the same scale. Injection volumes in liquid chromatography run from one to twenty microlitres, gas chromatography uses one or less, and mass spectrometry samples are prepared in tens. Because the analytical signal depends on the amount injected, the accuracy of a microlitre-scale measurement sets the accuracy of the whole result.

The identity with the cubic millimetre is a genuine convenience. Haematology once reported cell counts per cubic millimetre and now reports them per microlitre, and the numbers did not change at all, because the two units are the same. That is a rare case of a unit change in medicine that required no re-education and produced no errors.

One microlitre equals 1 cubic millimetre, 0.001 millilitres, 0.000001 litres, or about 0.0000338 US fluid ounces.