Conversion from 3 Terabits per second to Mebioctets per second

Information about the Terabit per second (Tbit/s)

The terabit per second is a unit of data transfer rate equal to a thousand gigabits per second. Its symbol is Tbit/s. It is the unit of the internet's backbone: the submarine cables, the exchange points and the long-haul optical links that carry traffic between continents.

A single modern transoceanic cable carries several hundred terabits per second. It achieves this not with one enormous channel but with wavelength division multiplexing, which sends dozens of separate colours of light down each fibre at once, and with several fibre pairs in the same cable. Each wavelength carries a few hundred gigabits, and the totals add up.

The historical comparison is worth stating plainly. The first transatlantic telephone cable, laid in 1956, carried thirty-six simultaneous voice calls. A cable laid in the 2020s carries hundreds of terabits per second, enough for hundreds of millions of simultaneous calls. That is a factor of roughly ten million in seventy years, and it was achieved almost entirely by changing what is sent down the glass rather than by laying more cable.

Internet exchange points, where networks meet and hand traffic to one another, publish their throughput in terabits per second. The largest in Europe and Asia peak in the tens of terabits, and those public graphs are among the most reliable measurements of how heavily the internet is being used at a given moment, because they count real traffic rather than capacity.

In octets, a terabit per second is 125 gigaoctets per second — the contents of a large laptop's disc moved every second, continuously. No single storage system can feed such a link; the traffic on these routes is the aggregate of millions of separate connections, each of them tiny by comparison.

Laboratory records go far higher, into petabits per second, using multi-core fibre and hundreds of wavelengths at once, though over short distances under controlled conditions. The gap between what is demonstrated in a laboratory and what is deployed under an ocean has historically been about a decade.

One terabit per second equals 1,000 gigabits per second, 125 gigaoctets per second, or about 0.9095 tebibits per second.

Information about the Mebioctet per second (Mio/s)

The mebioctet per second is a unit of data transfer rate equal to 1,048,576 octets per second, which is 1,024 kibioctets per second. Its symbol is Mio/s. It is the unit that disc benchmarks, copy tools and backup programs report in, and one of the few binary units most people see regularly without noticing.

Storage measurement produces it naturally. A benchmark writes and reads blocks whose size is a power of two, times the operation, and divides. The result is a binary rate, and reporting it as such preserves the arithmetic. A tool that converted to decimal megaoctets would introduce a 4.9 per cent adjustment for no purpose other than to match a marketing convention.

That five per cent is exactly where the two conventions diverge visibly for consumers. A drive advertised at 550 megaoctets per second and measured at 524 mebioctets per second is performing precisely as claimed; the numbers differ only because one is decimal and the other binary. A great deal of complaint about storage performance is this arithmetic misread as a shortfall.

For everyday sizes, one mebioctet per second copies a photograph in three seconds and a two-gigaoctet film in about half an hour. Modern drives run hundreds or thousands of times faster, so the unit is now the resolution at which small differences are reported rather than the scale of the whole figure.

The unit also appears in memory and cache measurements, in database throughput reports and in the output of the low-level commands that write disc images. All of these count in binary blocks because the underlying structures are binary, and all of them report in mebioctets per second because that is what the count divided by the time actually gives.

The habit of writing the lowercase i is worth keeping. It costs one character and it tells a later reader which of two conventions produced the number, which is information that cannot be recovered from context once it has been left out.

One mebioctet per second equals 1,048,576 octets per second, 1,024 kibioctets per second, or about 1.049 megaoctets per second.