Conversion from 25 US Gallons to Megaliters

=

Invert

Formula to convert US Gallons (gal US) to Megaliters (ML)

More information

US Gallons to Megaliters conversion table

US Gallons (gal US)Megaliters (ML)
1 US Gallon0.000003785411784 ML
2 US Gallons0.000007570823568 ML
3 US Gallons0.000011356235352 ML
4 US Gallons0.000015141647136 ML
5 US Gallons0.00001892705892 ML
10 US Gallons0.00003785411784 ML
20 US Gallons0.00007570823568 ML
25 US Gallons0.0000946352946 ML
50 US Gallons0.0001892705892 ML
100 US Gallons0.0003785411784 ML

Volume reference points

ReferenceUS Gallons (gal US)Megaliters (ML)
A teaspoon0.00132086 gal US0.000000005 ML
A can of soft drink0.0871768 gal US0.00000033 ML
A wine bottle0.198129 gal US0.00000075 ML
A bathtub39.6258 gal US0.00015 ML
An Olympic swimming pool660430 gal US2.5 ML

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the US Gallon (gal US)

The United States gallon is a unit of volume equal to exactly 231 cubic inches, or 3.785411784 litres. Its symbol is gal US. It contains four quarts, eight liquid pints and 128 United States fluid ounces, and it is about a fifth smaller than the imperial gallon still used in Britain and Ireland.

It is older than its British rival. The figure of 231 cubic inches comes from the English wine gallon standardised in 1707 under Queen Anne, which was the common measure across the American colonies. When Britain abolished its several gallons in 1824 and replaced them with a single imperial gallon based on ten pounds of water, the United States simply kept the one it already had, and the two systems have diverged ever since.

Fuel makes it the most politically visible unit in American life. The price of a gallon of gasoline is quoted daily, watched by governments and used as shorthand for the cost of living, and vehicle efficiency is stated in miles per gallon on every window sticker. Because the American gallon is smaller, a car rated at 30 miles per gallon in the United States would be described as 36 in Britain, which is the same car and the same fuel.

The petroleum industry counts in a multiple of it. The barrel of crude oil is defined as 42 United States gallons, a figure fixed in the Pennsylvania oil fields in the 1860s when a 40-gallon barrel plus two gallons of allowance for leakage became the trade standard. Every published figure for world oil production and reserves rests on that convention.

Domestic quantities follow the same measure. Milk, paint, water for the garden, propane and swimming pool chemistry are all sold and dosed by the gallon in the United States, and a gallon of fresh water weighs 8.34 pounds against the imperial gallon's ten. That difference in weight is a useful check when a figure of uncertain origin needs to be identified.

Care with labelling matters when the two gallons meet. A liquid described simply as a gallon in an American document is 3.785 litres and in a British one 4.546, and nothing in the word itself distinguishes them. Writing gal US or specifying litres removes an ambiguity that has caused real errors in shipping, aviation and chemical dosing.

One United States gallon equals 3.785411784 litres, 231 cubic inches, 128 US fluid ounces, or about 0.833 imperial gallons.


Information about the Megaliter (ML)

The megalitre is a unit of volume equal to one million litres, or one thousand cubic metres. Its symbol is ML. It is the working unit of water management: irrigation entitlements, treatment works capacity, farm dams and the trading of water rights are all counted in megalitres, because the quantities involved are far too large for litres and awkwardly small for cubic kilometres.

Australia has made the most of it. Irrigation water in the Murray-Darling Basin is held as entitlements measured in megalitres, seasonal allocations are announced as a percentage of those entitlements, and the resulting rights are traded on an open market where prices are quoted in dollars per megalitre. That market is among the largest of its kind in the world, and every price in it is a price per million litres.

British water utilities use it for throughput. A treatment works is rated in megalitres per day, distribution zones are balanced in the same unit, and leakage is reported as megalitres lost daily across a network. Because a large city consumes several hundred megalitres a day, the unit keeps national and regional figures in three or four digits rather than in unreadable strings of zeros.

A familiar object fixes the scale. An Olympic swimming pool of fifty metres by twenty-five, filled to two metres, holds 2500 cubic metres, which is two and a half megalitres. Journalism uses that comparison constantly for reservoir levels and flood volumes, and it works precisely because the pool and the unit are within a factor of three of each other.

On farms the unit describes storage. An Australian farm dam might hold anything from five to fifty megalitres, an on-farm irrigation season is planned in megalitres per hectare, and evaporation losses from open storage are estimated the same way. Sewage treatment, industrial process water and mine site water balances all follow.

Its one hazard is typographic. In the correct symbols, mL is a millilitre and ML is a megalitre, and the two differ by a factor of a thousand million. A document that is careless about capitals can therefore turn a laboratory volume into a reservoir, which is why water and clinical writing both insist on the case being right.

One megalitre equals 1,000,000 litres, 1000 cubic metres, about 264,172 US gallons, or about 220,000 imperial gallons.