Conversion from 20 Microliters to US Dry pints

=

Invert

Formula to convert Microliters (µL) to US Dry pints (pt)

More information

Microliters to US Dry pints conversion table

Microliters (µL)US Dry pints (pt)
1 Microliter0.00000181616596972 pt
2 Microliters0.00000363233193943 pt
3 Microliters0.00000544849790915 pt
4 Microliters0.00000726466387887 pt
5 Microliters0.00000908082984858 pt
10 Microliters0.0000181616596972 pt
20 Microliters0.0000363233193943 pt
25 Microliters0.0000454041492429 pt
50 Microliters0.0000908082984858 pt
100 Microliters0.000181616596972 pt

Volume reference points

ReferenceMicroliters (µL)US Dry pints (pt)
A teaspoon5000 µL0.00908083 pt
A can of soft drink330000 µL0.599335 pt
A wine bottle750000 µL1.36212 pt
A bathtub150000000 µL272.425 pt
An Olympic swimming pool2.5 × 1012 µL4540415 pt

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Microliter (µL)

The microlitre is a unit of volume equal to one millionth of a litre, written µL. It is exactly one cubic millimetre. It is the working unit of the molecular biology laboratory and of clinical haematology, and almost every quantity in modern biological science that is not a mass or a concentration is a number of microlitres.

Pipetting is what defines it in practice. Adjustable micropipettes are named after their maximum volume in microlitres, so a bench holds instruments of 2, 20, 200 and 1000, and a researcher's day consists largely of moving microlitres from one tube to another. A polymerase chain reaction is typically assembled in twenty to fifty microlitres, and a whole experiment may use less liquid than a teaspoon holds.

Blood counts are reported against it. White cells number between four thousand and eleven thousand per microlitre in a healthy adult, platelets between a hundred and fifty thousand and four hundred thousand, and red cells about five million. Those reference ranges are among the most widely used numbers in medicine, and all of them are counts within a cube one millimetre on a side.

Diagnostics has driven the volumes down. A modern blood glucose meter needs about half a microlitre of blood, which is why a finger-prick sample is enough where an earlier generation of instruments needed a syringe. Point-of-care analysers, lateral flow tests and microfluidic cartridges are all designed around the smallest sample a patient can be asked to give.

Analytical chemistry uses the same scale. Injection volumes in liquid chromatography run from one to twenty microlitres, gas chromatography uses one or less, and mass spectrometry samples are prepared in tens. Because the analytical signal depends on the amount injected, the accuracy of a microlitre-scale measurement sets the accuracy of the whole result.

The identity with the cubic millimetre is a genuine convenience. Haematology once reported cell counts per cubic millimetre and now reports them per microlitre, and the numbers did not change at all, because the two units are the same. That is a rare case of a unit change in medicine that required no re-education and produced no errors.

One microlitre equals 1 cubic millimetre, 0.001 millilitres, 0.000001 litres, or about 0.0000338 US fluid ounces.


Information about the US Dry pint (pt)

The United States dry pint is a unit of volume equal to 550.610471 millilitres, or 33.6 cubic inches. Its symbol is pt. It belongs to a separate American measuring system used for produce and grain rather than for liquids, and it is about sixteen per cent larger than the United States liquid pint of 473 millilitres.

Two parallel chains exist because two kinds of goods were once measured differently. Liquids descend from the wine gallon of 231 cubic inches, while dry goods descend from the Winchester bushel of 2150.42 cubic inches, a corn measure standardised in medieval England. Dividing the bushel by four gives a peck, by thirty-two a dry quart, and by sixty-four a dry pint, and none of those figures has any relation to the liquid chain.

Berries are where the unit is still met. Blueberries, raspberries and strawberries are sold in American markets in pint and quart baskets, and the basket is a dry measure. A pint of blueberries is therefore 551 millilitres of fruit, not 473, and a shopper comparing that basket with a pint of cream is comparing two different quantities under one name.

Nothing on a label resolves the ambiguity. Both are written pt, both are called a pint, and the word gives no clue as to which chain is meant. In practice the contents decide: if it pours, it is liquid measure, and if it is heaped, it is dry. That rule is reliable but it is nowhere written down, which is why converted American recipes so often disagree with one another.

Its existence is a survival from selling by bulk. Before cheap accurate scales, grain, apples, potatoes and shellfish were sold by filling a stamped measure and levelling it off, and the whole dry chain from bushel down to pint served that trade. Almost all of it has now been replaced by weight, and United States produce regulations increasingly specify pounds instead.

For conversion, the safest approach is to abandon the name entirely. A dry pint is 551 millilitres, a dry quart 1101, a peck 8.81 litres and a bushel 35.24. Writing the metric figure removes an ambiguity that the English word carries and cannot shed.

One United States dry pint equals 550.61 millilitres, 33.6 cubic inches, half a US dry quart, or about 1.164 US liquid pints.