| Reference | Hands (hh) | Feet (ft) |
|---|---|---|
| A sheet of A4 paper (long side) | 2.92323 hh | 0.974409 ft |
| Average adult human height | 16.7323 hh | 5.57743 ft |
| A football pitch (length) | 1033.46 hh | 344.488 ft |
| A marathon | 415305 hh | 138435 ft |
| Height of Mount Everest | 87096.5 hh | 29032.2 ft |
The hand is a unit of length equal to exactly four inches, or 101.6 millimetres. It survives in one specialised application: measuring the height of horses and ponies. Almost nowhere else is it still in use.
The measurement is taken from the ground to the withers, the ridge between the shoulder blades where the neck meets the back. The withers are chosen because they are a fixed skeletal point that does not move as the horse raises or lowers its head, so the figure is reproducible in a way that measuring to the top of the head would not be.
Notation is unusual and frequently misread. Heights are written with a decimal point that does not indicate a decimal fraction. A horse of 15.2 hands stands fifteen hands and two inches, which is 62 inches or 157.5 centimetres. Because a hand is four inches, the digit after the point runs only from 0 to 3, and 15.4 is not a valid height. The abbreviation hh, for hands high, is common.
The boundary between a pony and a horse is conventionally set at 14.2 hands, though the exact threshold varies between breed registries and competitive disciplines. Draught breeds such as the Shire commonly exceed 17 hands. The tallest horses on record have stood over 20 hands.
The unit derives from the breadth of a human palm, an origin shared with several ancient measures. Egyptian and Roman systems both used a palm of comparable size. Its standardisation at four inches in England is usually credited to a statute of Henry VIII. The persistence of the hand in equestrian use is largely conservatism, and metric heights in centimetres are now given alongside it in international competition rules.
Measuring accurately is harder than it appears. The horse must stand square on level ground with its head in a natural position, and a purpose-made measuring stick with a spirit level and sliding crossbar is used rather than a tape. Shoeing adds height, so official measurements specify whether the horse is shod, and competition rules that impose height limits require certification by an appointed measurer.
One hand equals 4 inches, 101.6 millimetres, or 0.1016 metres.
The foot is a unit of length equal to exactly 0.3048 metres, or twelve inches. Its plural is feet and its symbol is ft, though a single prime is used in technical drawing and a straight apostrophe informally.
Units based on the human foot appear across the ancient world, and their lengths varied considerably. The Roman pes measured about 296 millimetres and was divided into twelve unciae, an arrangement English inherited directly. Medieval Europe supported dozens of local feet, and a merchant crossing a few borders might encounter several. The English foot was standardised in stages, but its exact modern value dates only from the International Yard and Pound Agreement of 1959.
Aviation is the foot's most significant surviving international domain. Aircraft altitude is reported in feet almost everywhere, and flight levels are expressed in hundreds of feet, so FL350 means 35,000 feet. Russia and China historically used metres, and China's transition to feet for most flight levels in 2011 removed a genuine safety hazard at the boundaries of adjoining airspace. Vertical separation standards are defined in feet, and reduced vertical separation minima allow 1000 feet between aircraft above 29,000 feet.
Construction in the United States works in feet and inches throughout, and lumber, ceiling heights and room dimensions all follow. Broadcasting and film retain the foot for lens focus scales and for measuring film stock. Water depth in diving is given in feet in American practice and metres elsewhere, a divergence that dive computers accommodate by offering both.
Twelve as a divisor is the foot's practical strength. It divides evenly by two, three, four and six, which suits carpentry and layout work where thirds and quarters are common. A decimal unit divides cleanly only by two and five.
Water and timber keep two of its derivatives alive. The fathom, six feet, measured the depth of water for as long as a sounding line was thrown by hand, and old charts are still marked in fathoms even where new ones use metres. The board foot, a volume of one foot square by one inch thick, remains the trading unit of sawn timber in North America, so a lumber yard quotes prices per thousand board feet. Both illustrate a general habit of the imperial system: rather than adding prefixes, it names each new quantity after the job it does, which makes the units memorable to those who use them and opaque to everyone else.
One foot equals 12 inches, 0.3048 metres, or 30.48 centimetres exactly.