Conversion from 2 Petabits to Mebibits

Information about the Petabit (Pbit)

The petabit is a unit of digital information equal to a thousand terabits, or a million billion bits. Its symbol is Pbit. It sits at the boundary between quantities that are routinely deployed and quantities that still belong to research laboratories and to totals aggregated across whole networks.

A petabit is 125 teraoctets. That is the storage of roughly a hundred and twenty-five large consumer hard drives, or in more everyday terms about thirty thousand hours of high-definition video — three and a half years of continuous viewing. No single device holds a petabit; the figure describes systems rather than objects.

The most striking use of the unit is in optical transmission records. Research groups in Japan, the Netherlands and elsewhere have carried more than a petabit per second down a single strand of fibre, achieved by combining multi-core fibre — several light-guiding paths inside one cladding — with hundreds of separate wavelengths and advanced modulation. Those results run over tens of kilometres in the laboratory, not the thousands of kilometres a working sea cable must cross.

At the network level the petabit describes aggregate capacity. The total interconnect capacity of a large data centre, the combined capacity of all cables landing on a continent, and the peak throughput of the largest content networks are all quoted in petabits per second. These are sums over many links rather than the rating of any one of them.

Storage systems reach petabit scale too, though they are always labelled in octets. A large scientific archive holding a hundred petaoctets is holding eight hundred petabits, and facilities of that size exist for genomics, particle physics and astronomical survey data. The particle detectors at CERN discard the vast majority of what they see precisely because keeping it would exceed even these capacities.

The prefix peta comes from the Greek for five, because a petabit is a thousand raised to the fifth power in bits. That naming pattern continues upward with exa for six and zetta for seven, so the ladder above the petabit is regular and easy to extend.

One petabit equals 1,000,000,000,000,000 bits, 1,000 terabits, 125 teraoctets, or about 0.8882 pebibits.

Information about the Mebibit (Mibit)

The mebibit is a unit of digital information equal to 1,048,576 bits, which is 1,024 kibibits or two to the twentieth power. Its symbol is Mibit. It is the binary counterpart of the megabit, and the difference between the two has grown to 4.9 per cent — small enough to be ignored casually, large enough to matter in a specification.

Its natural home is semiconductor memory, where capacity is fixed by the address lines on the chip. A memory die with twenty address bits can reach exactly 1,048,576 locations, so densities land on powers of two rather than on round decimal numbers. A chip described as 512 megabits in a catalogue is very often 512 mebibits in reality, which is 537 megabits, and the datasheet is where the truth is written.

That habit is old and deliberate. Semiconductor manufacturers have always sized memory in binary because the wiring makes any other choice wasteful: an address bus is a fixed number of lines, and using only part of the range it can reach throws away silicon. Storage manufacturers had no such constraint, which is precisely why the two industries diverged.

For a sense of quantity, a mebibit is 131,072 octets, or about 128 kibioctets. That is roughly the contents of a long book as plain text, or a single low-resolution image. In network terms it is a hundredth of a second of a gigabit link.

The IEC prefixes were introduced in 1998 partly because at this level and above the approximation stops being safe. Buying a component described as one megabit and receiving one mebibit is a five per cent surprise; at the tebibit the same confusion is a ten per cent surprise, and in a contract for a data centre that is a real sum of money.

Correct usage is now common in standards documents, in hardware datasheets and in operating system internals, and rare in advertising and consumer software. The best rule when reading a figure is to ask which industry produced it: if it describes memory or a chip, assume binary; if it describes storage or a link, assume decimal.

One mebibit equals 1,048,576 bits, 1,024 kibibits, 131,072 octets, or about 1.049 megabits.