| Reference | Yards (yd) | Feet (ft) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.324803 yd | 0.974409 ft |
| Average adult human height | 1.85914 yd | 5.57743 ft |
| A football pitch (length) | 114.829 yd | 344.488 ft |
| A marathon | 46145 yd | 138435 ft |
| Height of Mount Everest | 9677.38 yd | 29032.2 ft |
The yard is a unit of length equal to exactly 0.9144 metres, or three feet. The symbol is yd. It is the base unit of the imperial and United States customary length systems, with the foot and inch defined as fractions of it.
That relationship is the reverse of what most people assume. Since 1959 the yard has been defined against the metre, and the foot and inch follow from it, so every imperial length unit is ultimately derived from an SI definition. The International Yard and Pound Agreement fixed the value at 0.9144 metres exactly, reconciling small differences between the American and British yards that had persisted for decades.
The origin of the name is uncertain. Old English gierd meant a rod or measuring stick. The frequently repeated story that Henry I defined the yard as the distance from his nose to his outstretched thumb is not supported by contemporary evidence, though it has proved durable. A physical standard yard bar was maintained in London from 1760, and its destruction in the 1834 Palace of Westminster fire forced a lengthy reconstruction from surviving copies.
Sport keeps the unit prominent. An American football field is 100 yards between goal lines, and the game's vocabulary is built around yardage. Golf course distances are marked in yards in Britain and the United States. Cricket sets the distance between wickets at 22 yards, a figure inherited from the surveyor's chain.
Fabric and carpet are sold by the yard in the United States, and textile widths are quoted in inches alongside. Landscaping materials such as topsoil and gravel are sold by the cubic yard, which is 27 cubic feet or about 0.7646 cubic metres.
Its cube runs the construction trade in North America. Concrete is ordered, delivered and billed by the cubic yard, about 0.765 cubic metres, and a standard mixer truck carries eight or nine of them; excavation, gravel, topsoil and demolition waste are all quoted the same way. Golf keeps the linear unit just as firmly, with every hole on every scorecard measured in yards and every club sold on the distance it carries, so a player who reads a shot as a hundred and fifty yards is using a measurement the rest of the game's arithmetic depends on. Between them the two uses make the yard unlikely to disappear.
One yard equals 3 feet, 36 inches, or 0.9144 metres exactly. It is a little shorter than a metre, by about 8.4 centimetres.
The foot is a unit of length equal to exactly 0.3048 metres, or twelve inches. Its plural is feet and its symbol is ft, though a single prime is used in technical drawing and a straight apostrophe informally.
Units based on the human foot appear across the ancient world, and their lengths varied considerably. The Roman pes measured about 296 millimetres and was divided into twelve unciae, an arrangement English inherited directly. Medieval Europe supported dozens of local feet, and a merchant crossing a few borders might encounter several. The English foot was standardised in stages, but its exact modern value dates only from the International Yard and Pound Agreement of 1959.
Aviation is the foot's most significant surviving international domain. Aircraft altitude is reported in feet almost everywhere, and flight levels are expressed in hundreds of feet, so FL350 means 35,000 feet. Russia and China historically used metres, and China's transition to feet for most flight levels in 2011 removed a genuine safety hazard at the boundaries of adjoining airspace. Vertical separation standards are defined in feet, and reduced vertical separation minima allow 1000 feet between aircraft above 29,000 feet.
Construction in the United States works in feet and inches throughout, and lumber, ceiling heights and room dimensions all follow. Broadcasting and film retain the foot for lens focus scales and for measuring film stock. Water depth in diving is given in feet in American practice and metres elsewhere, a divergence that dive computers accommodate by offering both.
Twelve as a divisor is the foot's practical strength. It divides evenly by two, three, four and six, which suits carpentry and layout work where thirds and quarters are common. A decimal unit divides cleanly only by two and five.
Water and timber keep two of its derivatives alive. The fathom, six feet, measured the depth of water for as long as a sounding line was thrown by hand, and old charts are still marked in fathoms even where new ones use metres. The board foot, a volume of one foot square by one inch thick, remains the trading unit of sawn timber in North America, so a lumber yard quotes prices per thousand board feet. Both illustrate a general habit of the imperial system: rather than adding prefixes, it names each new quantity after the job it does, which makes the units memorable to those who use them and opaque to everyone else.
One foot equals 12 inches, 0.3048 metres, or 30.48 centimetres exactly.