Conversion from 100 Pebibits per second to Petabits per second

Information about the Pebibit per second (Pibit/s)

The pebibit per second is a unit of data transfer rate equal to 1,024 tebibits per second, which is two to the fiftieth power bits per second. Its symbol is Pibit/s. It is the binary counterpart of the petabit per second, and the two differ by 12.6 per cent.

No deployed system runs at this rate, and the unit therefore describes either an aggregate or a laboratory result. Optical transmission records set on single fibres reach a petabit per second, and the binary figure for the same experiment is 12.6 per cent lower — a difference that matters when comparing results between papers that use different conventions.

Where the unit is genuinely appropriate is in describing structures built from powers of two. The total switching capacity of a very large network fabric, built from ports and buffers that are all binary, is a binary quantity divided by time, and reporting it in decimal units discards the arithmetic that produced it. The same applies to the summed memory bandwidth of a machine whose channel count is a power of two.

In octets a pebibit per second is 140,737,488,355,328, which is 128 tebioctets per second. That is the storage of a thousand large consumer drives moved every second, and it exists only as a total across many thousands of parallel paths inside a single facility.

The size of the discrepancy at this level is the argument for the whole IEC series in miniature. What began as a harmless 2.4 per cent at the kibibit is now an eighth, and it compounds by 2.4 per cent at every further step. A convention that was acceptable for small numbers becomes untenable for large ones, and the point of the binary prefixes is to make the distinction visible before that happens.

For a converter, the arithmetic is unremarkable: multiply or divide by 1,024 the appropriate number of times, and by eight to reach octets. What matters is that the tool does not silently substitute the decimal unit when it sees a value it cannot label precisely.

One pebibit per second equals 1,024 tebibits per second, 140,737,488,355,328 octets per second, or about 1.126 petabits per second.

Information about the Petabit per second (Pbit/s)

The petabit per second is a unit of data transfer rate equal to a thousand terabits per second. Its symbol is Pbit/s. It marks the frontier of optical transmission research: the rate at which laboratories have carried data down a single strand of glass, and which no deployed system yet approaches.

The records were set by combining three techniques. Multi-core fibre puts several separate light-guiding paths inside one cladding, so that a single strand behaves like a bundle. Wavelength division multiplexing runs hundreds of distinct colours down each of those cores. Advanced modulation encodes many bits into each pulse. Multiplying the three together is what reaches a petabit per second.

Such demonstrations run over tens of kilometres of fibre in controlled conditions, not the thousands of kilometres a working sea cable must span. Distance is the hard part: signals attenuate, dispersion smears pulses together, and non-linear effects in the glass grow with power. Every kilometre added makes the same rate harder to sustain, which is why deployed cables sit two orders of magnitude below the laboratory record.

In octets a petabit per second is 125 teraoctets per second, which is roughly the storage of a hundred and twenty-five large hard drives moved every second. Nothing at either end of such a link could produce or absorb data at that rate; the figure describes the medium's capacity rather than any use of it.

At the network level the unit is used for aggregates. The total interconnect capacity of a very large data centre, the summed capacity of all the cables landing on a continent, and the peak traffic of the largest content networks are quoted in petabits per second. These are sums over thousands of links, not the rating of any one.

The trajectory is worth noting. Transoceanic capacity has grown by roughly a factor of ten every seven or eight years for several decades, driven almost entirely by better electronics and better coding rather than by more glass. If that continues, the petabit per second will describe a working cable within a generation.

One petabit per second equals 1,000 terabits per second, 125 teraoctets per second, or about 0.8882 pebibits per second.