Conversion from 10 Octets per second to Gibioctets per second

Information about the Octet per second (octet/s)

The octet per second is a unit of data transfer rate equal to eight bits per second. Its symbol is octet/s. It is the unit in which software reports transfer speeds, as against the bits per second in which hardware and network services advertise them, and the factor of eight between the two conventions is the source of endless confusion.

The division of labour is consistent once it is understood. Anything describing a physical link — an Ethernet port, a fibre connection, a radio channel, a broadband package — is quoted in bits per second, because bits are what the signalling actually carries. Anything describing a file moving from one place to another is quoted in octets per second, because files are measured in octets.

A download manager that reports 12 megaoctets per second on a connection sold as 100 megabits per second is not disagreeing with the advertisement; it is stating the same rate in the other convention, and the arithmetic between them is a division by eight. Recognising this immediately removes the most common cause of complaint about internet speed.

Individual octets per second appear in the same narrow places as individual bits: deep-space telemetry, low-power sensor links, and the slowest legacy serial connections. A rate of a hundred octets per second would move a page of text in about twenty seconds, which was a normal experience in the 1970s and is unimaginable now.

The unit also underlies the way disc and interface throughput is described. A drive that sustains 500 megaoctets per second is moving four gigabits per second across its interface, and matching the two figures is a routine part of system design: an interface rated in gigabits must be compared with a drive rated in octets, and the factor of eight decides whether one starves the other.

Storage tools reinforce the convention. Every file copy utility, backup program and command-line transfer tool reports in octets per second or its multiples, and every network measurement tool reports in bits per second. A person reading both at once has to keep the conversion in mind, which is exactly what makes the distinction worth stating explicitly.

One octet per second equals 8 bits per second, 0.008 kilobits per second, or 0.001 kilooctets per second.

Information about the Gibioctet per second (Gio/s)

The gibioctet per second is a unit of data transfer rate equal to 1,073,741,824 octets per second, which is 1,024 mebioctets per second. Its symbol is Gio/s. It is the unit of memory bandwidth and of the fastest storage interfaces, and the binary counterpart of the gigaoctet per second, from which it differs by 7.4 per cent.

Memory is where the unit belongs most naturally. A memory channel transfers a fixed number of octets per clock cycle, and that number is a power of two, so the resulting bandwidth is a binary multiple of the clock frequency. A machine with several channels reaches tens of gibioctets per second, and an accelerator with stacked memory reaches thousands.

Storage has caught up. A fast solid-state drive on the current interface sustains several gibioctets per second, which means that for the first time the drive and the memory are within an order of magnitude of each other. That convergence has changed how software is written: the old assumption that reading from disc is thousands of times slower than reading from memory no longer holds.

The unit appears in benchmark output, in system monitoring displays and in the specifications of processor interconnects. All of these count in binary because the structures they measure are binary, and reporting the result with a decimal prefix would introduce a seven per cent error for the sake of a familiar-looking label.

For a sense of what the rate means, one gibioctet per second copies a two-gigaoctet film in under two seconds and fills a one-teraoctet drive in about a quarter of an hour. Anything at this speed is faster than every external connection in an ordinary building, so the limiting factor moves inside the machine.

The distinction from the decimal unit matters most in procurement and capacity planning. A specification that requires 10 gigaoctets per second and a system that delivers 10 gibioctets per second are not the same, and the difference of 7.4 per cent is the sort of margin that decides whether a design meets its requirement.

One gibioctet per second equals 1,073,741,824 octets per second, 1,024 mebioctets per second, or about 1.074 gigaoctets per second.