Conversion from US Gallons to Cubic meters

=

Invert

Formula to convert US Gallons (gal US) to Cubic meters (m³)

More information

US Gallons to Cubic meters conversion table

US Gallons (gal US)Cubic meters (m³)
1 US Gallon0.003785411784 m³
2 US Gallons0.007570823568 m³
3 US Gallons0.011356235352 m³
4 US Gallons0.015141647136 m³
5 US Gallons0.01892705892 m³
10 US Gallons0.03785411784 m³
20 US Gallons0.07570823568 m³
25 US Gallons0.0946352946 m³
50 US Gallons0.1892705892 m³
100 US Gallons0.3785411784 m³

Volume reference points

ReferenceUS Gallons (gal US)Cubic meters (m³)
A teaspoon0.00132086 gal US0.000005 m³
A can of soft drink0.0871768 gal US0.00033 m³
A wine bottle0.198129 gal US0.00075 m³
A bathtub39.6258 gal US0.15 m³
An Olympic swimming pool660430 gal US2500 m³

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the US Gallon (gal US)

The United States gallon is a unit of volume equal to exactly 231 cubic inches, or 3.785411784 litres. Its symbol is gal US. It contains four quarts, eight liquid pints and 128 United States fluid ounces, and it is about a fifth smaller than the imperial gallon still used in Britain and Ireland.

It is older than its British rival. The figure of 231 cubic inches comes from the English wine gallon standardised in 1707 under Queen Anne, which was the common measure across the American colonies. When Britain abolished its several gallons in 1824 and replaced them with a single imperial gallon based on ten pounds of water, the United States simply kept the one it already had, and the two systems have diverged ever since.

Fuel makes it the most politically visible unit in American life. The price of a gallon of gasoline is quoted daily, watched by governments and used as shorthand for the cost of living, and vehicle efficiency is stated in miles per gallon on every window sticker. Because the American gallon is smaller, a car rated at 30 miles per gallon in the United States would be described as 36 in Britain, which is the same car and the same fuel.

The petroleum industry counts in a multiple of it. The barrel of crude oil is defined as 42 United States gallons, a figure fixed in the Pennsylvania oil fields in the 1860s when a 40-gallon barrel plus two gallons of allowance for leakage became the trade standard. Every published figure for world oil production and reserves rests on that convention.

Domestic quantities follow the same measure. Milk, paint, water for the garden, propane and swimming pool chemistry are all sold and dosed by the gallon in the United States, and a gallon of fresh water weighs 8.34 pounds against the imperial gallon's ten. That difference in weight is a useful check when a figure of uncertain origin needs to be identified.

Care with labelling matters when the two gallons meet. A liquid described simply as a gallon in an American document is 3.785 litres and in a British one 4.546, and nothing in the word itself distinguishes them. Writing gal US or specifying litres removes an ambiguity that has caused real errors in shipping, aviation and chemical dosing.

One United States gallon equals 3.785411784 litres, 231 cubic inches, 128 US fluid ounces, or about 0.833 imperial gallons.


Information about the Cubic meter (m³)

The cubic metre is the SI unit of volume, written m³. It is the volume of a cube one metre on each side, and because the metre is a base unit, every other volume unit in the system is derived from it. It holds a thousand litres, and a cubic metre of fresh water has a mass of very nearly one tonne, which is the single most useful fact about it.

Utilities are billed in it. Domestic water meters almost everywhere record consumption in cubic metres, and a household of four uses somewhere between 100 and 200 of them a year. Natural gas is metered the same way and then converted to energy for billing, because the heat released by a cubic metre of gas depends on its composition and has to be corrected for temperature and pressure at the meter.

Construction orders materials by it. Ready-mixed concrete is sold and delivered by the cubic metre, a standard truck carrying six to eight; excavation and earthworks are priced per cubic metre moved; and sawn timber, aggregate, topsoil and bark are all traded the same way. Because a cubic metre of concrete weighs about 2.4 tonnes, the unit also decides what a lorry or a crane can carry.

Freight uses it in a more subtle way. Shipping and removals quote volume in cubic metres, and air freight charges by whichever is greater, the actual mass or a volumetric mass calculated at a fixed ratio, commonly 167 kilograms to the cubic metre. Light bulky cargo is therefore priced by the space it occupies rather than by what it weighs, and the whole calculation runs on this unit.

Environmental measurement lives here too. River flow is given in cubic metres per second, reservoir capacity in millions of cubic metres, air quality as micrograms of pollutant per cubic metre of air, and ventilation as cubic metres per hour. A room four metres by five with a ceiling at two and a half holds fifty cubic metres of air, which is the sort of figure ventilation standards are written against.

Against imperial and United States units it converts to 35.315 cubic feet or 1.308 cubic yards. The cubic yard matters most in practice, because American concrete and excavation are ordered in it, and the two units are close enough that a mistaken figure looks plausible while being a third out.

One cubic metre equals 1000 litres, about 35.315 cubic feet, about 1.308 cubic yards, or about 264.2 US gallons.