Conversion from Square yards to Square decameters

Information about the Square yard (sq yd)

The square yard is a unit of area equal to nine square feet, or 0.83612736 square metres exactly. Its symbol is sq yd, sometimes written yd². It is the area of a square one yard on a side, and 4840 of them make an acre. It occupies the awkward middle of the imperial ladder: too large for a workshop, too small for a field, and used mainly for surfaces that are laid rather than built.

Ground coverings are its main business. Turf is sold and laid by the square yard, asphalt paving and road resurfacing are measured in square yards in the United States, and carpet was priced that way for most of the twentieth century before American retailers moved to the square foot. Anything that arrives on a roll or a pallet and is spread out tends to be counted in this unit.

Textiles use it in an indirect but important way. Cloth is bought by the linear yard off a roll of known width, but its weight is specified in ounces per square yard, which is what allows two fabrics of different widths to be compared. A shirting might be four ounces per square yard and a heavy canvas eighteen, and those numbers describe the cloth more usefully than any measurement of the bolt does.

It also carries a large part of the South Asian property market. In Pakistan and northern India, plots are commonly sold in gaz, which is the square yard under a local name, so a house plot might be advertised at 240 gaz. Larger holdings switch to the marla and the kanal, both of which are defined as multiples of the square yard, so the whole regional system rests on this unit even where the English name is never used.

Its relationship to the rest of the imperial ladder is unusually clean at one step and unusually messy at the next. Nine square feet is easy; 1296 square inches and 4840 to the acre are not. That mixture is characteristic of a system built from body measures and ploughing practice rather than from a single decimal idea.

Conversion to metric is exact but not memorable: one square yard is 0.83612736 square metres and one square metre is 1.19599 square yards. A rough rule that a square metre is about a fifth larger than a square yard is close enough for judging a room, though not for ordering material.

One square yard equals 9 square feet, 1296 square inches, about 0.8361 square metres, or about 0.000207 acres.

Information about the Square decameter (dam²)

The square decametre is a unit of area equal to one hundred square metres. It is written dam², and it is the area of a square ten metres on a side, since a decametre is ten metres. It is exactly the same quantity as the are, and the choice between the two names is a choice between strict metric grammar and two centuries of habit.

The International System is built from coherent units, meaning every derived unit is a product or quotient of base units with no extra factors. Squaring a prefixed length gives a perfectly coherent area, so the square decametre needs no special permission to exist. The are, by contrast, is listed as a non-SI unit accepted for use with the SI, tolerated for land measurement rather than derived from anything.

Despite that formal advantage, the square decametre lost decisively. The are was already in every French land register when the modern system was codified, and a register does not change its columns for a matter of notation. The result is that the correct SI form is almost never written, and its accepted non-SI equivalent is what appears on deeds across half of Europe.

The quantity itself is a useful one to be able to picture, whichever name is used. A hundred square metres is a square ten metres on a side: a generous garden, the ground floor of a small house, a market stall pitch, or a large classroom. It is the last area a person can pace out accurately without instruments, and it is the natural size for describing a plot rather than a field.

Where the symbol does appear, the exponent must be read carefully. The string dam already means decametre, a length, so dam² and dam differ by an entire dimension, and a dropped superscript turns an area into a distance. Software that strips formatting from tables is a common cause of exactly that error.

For any practical purpose, converting is the right response. Multiply by a hundred for square metres, divide by a hundred for hectares, and the resulting figure will match whatever else is on the page. One square decametre is one are, and both are one hundred square metres, so nothing is lost in either direction.

One square decametre equals 100 square metres, 1 are, 0.01 hectares, or about 1076.4 square feet.