Conversion from Square nautical miles to Square yards

=

Invert

Formula to convert Square nautical miles (sq nmi) to Square yards (sq yd)

More information

Square nautical miles to Square yards conversion table

Square nautical miles (sq nmi)Square yards (sq yd)
1 Square nautical mile4102131.04377 sq yd
2 Square nautical miles8204262.08754 sq yd
3 Square nautical miles12306393.1313 sq yd
4 Square nautical miles16408524.1751 sq yd
5 Square nautical miles20510655.2188 sq yd
10 Square nautical miles41021310.4377 sq yd
20 Square nautical miles82042620.8754 sq yd
25 Square nautical miles102553276.094 sq yd
50 Square nautical miles205106552.188 sq yd
100 Square nautical miles410213104.377 sq yd

Area reference points

ReferenceSquare nautical miles (sq nmi)Square yards (sq yd)
A sheet of A4 paper0.0000000181842 sq nmi0.0745939 sq yd
A tennis court0.0000760371 sq nmi311.914 sq yd
A football pitch0.00208169 sq nmi8539.37 sq yd
One hectare0.00291553 sq nmi11959.9 sq yd
Central Park, New York0.994197 sq nmi4078326 sq yd

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Square nautical mile (sq nmi)

The square nautical mile is a unit of area equal to 3,429,904 square metres, or about 3.43 square kilometres. Its symbol is sq nmi. It is the area of a square one nautical mile on a side, the nautical mile being defined as exactly 1852 metres. It is the working unit of everything that happens at sea and is measured across a surface rather than along a line.

Its usefulness comes from the definition of the nautical mile itself. One nautical mile is very nearly one minute of latitude, so a square nautical mile is close to a one-minute cell on a chart. That makes it the natural grid square for anything plotted on a nautical chart, because the unit and the graticule agree without any conversion, and a navigator can read distance and area off the same scale.

Maritime law is written in nautical miles and therefore accounted in square ones. Under the international law of the sea, a coastal state has a territorial sea of twelve nautical miles, a contiguous zone of twenty-four and an exclusive economic zone reaching two hundred. The resulting areas are vast: a state with scattered island possessions can control several million square kilometres of ocean, and comparisons between such claims are usually made after converting these figures to metric.

Search and rescue planning depends on the unit directly. A search area is defined in square nautical miles, and the time to cover it follows from the search vessel's speed in knots and the sweep width of its sensors, both of which are already in nautical units. Keeping the whole calculation in one system is what allows a coordinator to estimate coverage without stopping to convert anything.

Fisheries science and naval operations use it the same way. Fish stock density is reported per square nautical mile, survey transects are spaced in nautical miles, exercise and restricted areas are drawn as blocks of them, and aviation control zones over water are described in the same terms because aircraft also navigate in knots.

For conversion, one square nautical mile is 3.43 square kilometres, 1.32 square statute miles, or about 848 acres. The ratio to the statute mile is not intuitive, since the nautical mile is only about 15 per cent longer but the square is a third larger, which is the usual consequence of squaring a length ratio.

One square nautical mile equals 3,429,904 square metres, about 3.43 square kilometres, about 1.32 square miles, or about 848 acres.


Information about the Square yard (sq yd)

The square yard is a unit of area equal to nine square feet, or 0.83612736 square metres exactly. Its symbol is sq yd, sometimes written yd². It is the area of a square one yard on a side, and 4840 of them make an acre. It occupies the awkward middle of the imperial ladder: too large for a workshop, too small for a field, and used mainly for surfaces that are laid rather than built.

Ground coverings are its main business. Turf is sold and laid by the square yard, asphalt paving and road resurfacing are measured in square yards in the United States, and carpet was priced that way for most of the twentieth century before American retailers moved to the square foot. Anything that arrives on a roll or a pallet and is spread out tends to be counted in this unit.

Textiles use it in an indirect but important way. Cloth is bought by the linear yard off a roll of known width, but its weight is specified in ounces per square yard, which is what allows two fabrics of different widths to be compared. A shirting might be four ounces per square yard and a heavy canvas eighteen, and those numbers describe the cloth more usefully than any measurement of the bolt does.

It also carries a large part of the South Asian property market. In Pakistan and northern India, plots are commonly sold in gaz, which is the square yard under a local name, so a house plot might be advertised at 240 gaz. Larger holdings switch to the marla and the kanal, both of which are defined as multiples of the square yard, so the whole regional system rests on this unit even where the English name is never used.

Its relationship to the rest of the imperial ladder is unusually clean at one step and unusually messy at the next. Nine square feet is easy; 1296 square inches and 4840 to the acre are not. That mixture is characteristic of a system built from body measures and ploughing practice rather than from a single decimal idea.

Conversion to metric is exact but not memorable: one square yard is 0.83612736 square metres and one square metre is 1.19599 square yards. A rough rule that a square metre is about a fifth larger than a square yard is close enough for judging a room, though not for ordering material.

One square yard equals 9 square feet, 1296 square inches, about 0.8361 square metres, or about 0.000207 acres.