Conversion from Square feet to Centiares

Information about the Square foot (sq ft)

The square foot is a unit of area equal to 144 square inches, or 0.092903 square metres. Its symbol is sq ft, sometimes written ft². It is the area of a square one foot on a side, and it is the unit in which property is bought, sold and rented across the English-speaking world and in several places that are otherwise entirely metric.

Real estate is its home. American and British homes are advertised by their floor area in square feet, and commercial space is let at a rent per square foot per year, which is the standard way of comparing one building or one city with another. A one-bedroom flat runs to about 500 square feet, a family house between 1500 and 2500, and an office desk with its share of circulation is reckoned at 150 to 200.

Its reach goes beyond countries that use imperial units generally. Apartments in India are sold by the square foot despite the country being metric in every other respect, and Hong Kong quotes flat sizes and prices the same way, which produces some of the highest per-square-foot figures on earth. In both cases the unit survived because the property market adopted it before metrication and never had a reason to change.

Building trades use it for materials and for capacity. Flooring, carpet, tile, plasterboard and insulation are priced by the square foot in North America; roofing has its own multiple, the square, equal to one hundred square feet; and air conditioning is sized in British thermal units per square foot of conditioned space. Leather is sold by the square foot in the United States where European tanneries use square decimetres.

The conversion to metric is exact but inconvenient. Since the foot is defined as exactly 0.3048 metres, one square foot is exactly 0.09290304 square metres, and one square metre is 10.7639 square feet. Neither figure is memorable, so converted property listings often show suspiciously round numbers in one system and awkward ones in the other, which is a reliable sign of which unit the original was written in.

Above it, land moves to the acre at 43,560 square feet, and below it the square inch takes over at one hundred and forty-fourth of the value. That factor of 144 rather than 100 is what makes mental arithmetic in imperial areas harder than in metric ones.

One square foot equals 144 square inches, about 0.0929 square metres, or about 0.1111 square yards.

Information about the Centiare (ca)

The centiare is a unit of area equal to one hundredth of an are, which makes it exactly one square metre. Its symbol is ca. It is the only unit in common use that is an exact duplicate of another under a different name, and the reason it exists at all is a matter of bookkeeping rather than of measurement.

When the French metric law of 1795 established the are as the decimal unit of land, it created a full ladder around it: the hectare above and the centiare below. Land registries then adopted a three-column format, recording every parcel as so many hectares, so many ares and so many centiares. The last column needed a name, and the square metre, though identical, did not fit the pattern.

That format is still in force. French, Belgian, Luxembourgish and Dutch land registers write parcel areas as three numbers in sequence, so 1 ha 25 a 30 ca means 12,530 square metres. The middle and last figures never exceed 99, which makes the notation self-checking: a value like 1 ha 130 a is malformed and signals a transcription error before anyone has to do arithmetic.

Reading it is a matter of place value. Each hectare is 10,000 square metres, each are is 100, and each centiare is one, so the three columns simply spell out a number in base one hundred. A notary's figure of 0 ha 04 a 62 ca is 462 square metres, and a surveyor's plan showing the same plot would print 462 m² without further comment.

Outside the land registry the centiare has no life. Nobody specifies a floor, a wall or a plot of ground in centiares when the square metre says the same thing with a symbol everyone recognises, and no branch of science or engineering has ever adopted it. It is a unit that exists to fill a column.

The one hazard is the symbol. In many documents ca is an abbreviation for the Latin circa, meaning approximately, so a figure that reads ca 400 could mean 400 centiares or about 400 of something else entirely. In land records the position of the number resolves it; in running text, converting to square metres removes the ambiguity for good.

One centiare equals exactly 1 square metre, 0.01 ares, or about 10.764 square feet.