| Square decameters (dam²) | Square nautical miles (sq nmi) |
|---|---|
| 1 Square decameter | 0.0000291553349598 sq nmi |
| 2 Square decameters | 0.0000583106699196 sq nmi |
| 3 Square decameters | 0.0000874660048794 sq nmi |
| 4 Square decameters | 0.000116621339839 sq nmi |
| 5 Square decameters | 0.000145776674799 sq nmi |
| 10 Square decameters | 0.000291553349598 sq nmi |
| 20 Square decameters | 0.000583106699196 sq nmi |
| 25 Square decameters | 0.000728883373995 sq nmi |
| 50 Square decameters | 0.00145776674799 sq nmi |
| 100 Square decameters | 0.00291553349598 sq nmi |
| Reference | Square decameters (dam²) | Square nautical miles (sq nmi) |
|---|---|---|
| A sheet of A4 paper | 0.0006237 dam² | 0.0000000181842 sq nmi |
| A tennis court | 2.608 dam² | 0.0000760371 sq nmi |
| A football pitch | 71.4 dam² | 0.00208169 sq nmi |
| One hectare | 100 dam² | 0.00291553 sq nmi |
| Central Park, New York | 34100 dam² | 0.994197 sq nmi |
The square decametre is a unit of area equal to one hundred square metres. It is written dam², and it is the area of a square ten metres on a side, since a decametre is ten metres. It is exactly the same quantity as the are, and the choice between the two names is a choice between strict metric grammar and two centuries of habit.
The International System is built from coherent units, meaning every derived unit is a product or quotient of base units with no extra factors. Squaring a prefixed length gives a perfectly coherent area, so the square decametre needs no special permission to exist. The are, by contrast, is listed as a non-SI unit accepted for use with the SI, tolerated for land measurement rather than derived from anything.
Despite that formal advantage, the square decametre lost decisively. The are was already in every French land register when the modern system was codified, and a register does not change its columns for a matter of notation. The result is that the correct SI form is almost never written, and its accepted non-SI equivalent is what appears on deeds across half of Europe.
The quantity itself is a useful one to be able to picture, whichever name is used. A hundred square metres is a square ten metres on a side: a generous garden, the ground floor of a small house, a market stall pitch, or a large classroom. It is the last area a person can pace out accurately without instruments, and it is the natural size for describing a plot rather than a field.
Where the symbol does appear, the exponent must be read carefully. The string dam already means decametre, a length, so dam² and dam differ by an entire dimension, and a dropped superscript turns an area into a distance. Software that strips formatting from tables is a common cause of exactly that error.
For any practical purpose, converting is the right response. Multiply by a hundred for square metres, divide by a hundred for hectares, and the resulting figure will match whatever else is on the page. One square decametre is one are, and both are one hundred square metres, so nothing is lost in either direction.
One square decametre equals 100 square metres, 1 are, 0.01 hectares, or about 1076.4 square feet.
The square nautical mile is a unit of area equal to 3,429,904 square metres, or about 3.43 square kilometres. Its symbol is sq nmi. It is the area of a square one nautical mile on a side, the nautical mile being defined as exactly 1852 metres. It is the working unit of everything that happens at sea and is measured across a surface rather than along a line.
Its usefulness comes from the definition of the nautical mile itself. One nautical mile is very nearly one minute of latitude, so a square nautical mile is close to a one-minute cell on a chart. That makes it the natural grid square for anything plotted on a nautical chart, because the unit and the graticule agree without any conversion, and a navigator can read distance and area off the same scale.
Maritime law is written in nautical miles and therefore accounted in square ones. Under the international law of the sea, a coastal state has a territorial sea of twelve nautical miles, a contiguous zone of twenty-four and an exclusive economic zone reaching two hundred. The resulting areas are vast: a state with scattered island possessions can control several million square kilometres of ocean, and comparisons between such claims are usually made after converting these figures to metric.
Search and rescue planning depends on the unit directly. A search area is defined in square nautical miles, and the time to cover it follows from the search vessel's speed in knots and the sweep width of its sensors, both of which are already in nautical units. Keeping the whole calculation in one system is what allows a coordinator to estimate coverage without stopping to convert anything.
Fisheries science and naval operations use it the same way. Fish stock density is reported per square nautical mile, survey transects are spaced in nautical miles, exercise and restricted areas are drawn as blocks of them, and aviation control zones over water are described in the same terms because aircraft also navigate in knots.
For conversion, one square nautical mile is 3.43 square kilometres, 1.32 square statute miles, or about 848 acres. The ratio to the statute mile is not intuitive, since the nautical mile is only about 15 per cent longer but the square is a third larger, which is the usual consequence of squaring a length ratio.
One square nautical mile equals 3,429,904 square metres, about 3.43 square kilometres, about 1.32 square miles, or about 848 acres.