| Milliliters (mL) | Cubic millimeters (mm³) |
|---|---|
| 1 Milliliter | 1000 mm³ |
| 2 Milliliters | 2000 mm³ |
| 3 Milliliters | 3000 mm³ |
| 4 Milliliters | 4000 mm³ |
| 5 Milliliters | 5000 mm³ |
| 10 Milliliters | 10000 mm³ |
| 20 Milliliters | 20000 mm³ |
| 25 Milliliters | 25000 mm³ |
| 50 Milliliters | 50000 mm³ |
| 100 Milliliters | 100000 mm³ |
| Reference | Milliliters (mL) | Cubic millimeters (mm³) |
|---|---|---|
| A teaspoon | 5 mL | 5000 mm³ |
| A can of soft drink | 330 mL | 330000 mm³ |
| A wine bottle | 750 mL | 750000 mm³ |
| A bathtub | 150000 mL | 150000000 mm³ |
| An Olympic swimming pool | 2.5 × 109 mL | 2.5 × 1012 mm³ |
The millilitre is a unit of volume equal to one thousandth of a litre, written mL or ml. It is exactly one cubic centimetre. It is the working unit of medicine, cookery, cosmetics and the laboratory, and it is the smallest volume most people handle deliberately in the course of a day.
Medicine relies on it more heavily than on any other unit of volume. Oral liquids are dosed in millilitres, syringes are graduated in them, intravenous fluids are prescribed as so many millilitres per hour, and blood test results are reported per millilitre or per decilitre. The precision matters: a tenfold dosing error in a paediatric prescription is a difference of a single decimal place in this unit.
That is why the household spoon has been driven out of medical instructions. A teaspoon is nominally five millilitres, but real spoons vary from two to nine, so dosing devices are now supplied with liquid medicines and marked in millilitres. Regulators in several countries require the millilitre marking precisely because it removes an ambiguity that spoons cannot.
Cooking outside the United States runs on it. European and Asian recipes give liquids in millilitres and litres rather than in cups, which is more precise because a cup measures volume by an unstandardised container while a millilitre does not. Wine and spirit measures, coffee shot sizes, and the capacity of a baby bottle are all specified in millilitres.
A convenient identity helps in the kitchen and the laboratory alike. One millilitre of water has a mass of one gram, so a recipe or a protocol can move between mass and volume for water-like liquids without a real error. Cosmetics use the same unit throughout, from a five-millilitre sample to a five-hundred-millilitre bottle.
Against United States and imperial measures it converts awkwardly, and the two differ from each other. One millilitre is 0.0338 United States fluid ounces but 0.0352 imperial fluid ounces, so a fluid ounce is about four per cent larger in Britain than in America, and any drink or medicine volume converted between them needs to state which system was meant.
One millilitre equals 1 cubic centimetre, 0.001 litres, about 0.0338 US fluid ounces, or about 0.0352 imperial fluid ounces.
The cubic millimetre is a unit of volume equal to one thousandth of a cubic centimetre, written mm³. It is the volume of a cube one millimetre on each side, and it is exactly one microlitre. Which of the two names is used depends on whether the thing being measured is a solid or a liquid, and the distinction is entirely a matter of professional habit.
Machining measures productivity in it. The material removal rate of a milling cutter or a grinding wheel is quoted in cubic millimetres per minute, and that single figure captures what a machine and a tool can achieve better than spindle speed or feed rate can on their own. Comparing two cutting strategies, two tool coatings or two machines means comparing how many cubic millimetres of metal each turns into swarf per unit time.
Additive manufacturing inverts the same measurement. A fused-filament printer deposits ten to twenty cubic millimetres a second, a laser powder-bed machine rather less, and build time follows directly from the part volume divided by that rate. Because the volume of a component is known exactly from its model, the estimate is unusually reliable.
Wear and durability testing uses the unit to describe loss. A specific wear rate is stated in cubic millimetres removed per newton of load and metre of sliding, which allows materials of very different hardness to be compared on one scale. Bearing life, brake pad testing and coating evaluation all reduce to counting cubic millimetres that are no longer there.
Medical imaging works at the same magnitude. Micro-computed tomography of bone reports trabecular volume and porosity in cubic millimetres, tumour volumes in early imaging are given the same way, and voxel sizes in high-resolution scans are quoted as fractions of one. In each case the unit is small enough to describe structure rather than merely size.
Its identity with the microlitre is worth remembering when moving between fields. An engineer discussing a cubic millimetre of material and a biologist discussing a microlitre of solution are talking about the same quantity, and any calculation that mixes the two needs no conversion factor at all.
One cubic millimetre equals 1 microlitre, 0.001 cubic centimetres, 0.000000001 cubic metres, or about 0.000061 cubic inches.