Conversion from Hectopascals to Pascals

Information about the Hectopascal (hPa)

The hectopascal is a unit of pressure equal to one hundred pascals. Its symbol is hPa. It is exactly one millibar, and that identity is the whole reason it exists: when meteorology moved to SI units in the 1980s, the hectopascal let every barometer, chart and forecast keep its numbers unchanged while changing the name on them.

Weather is its home and almost its only use. Standard atmospheric pressure at sea level is 1013.25 hectopascals, a settled high-pressure system reads 1020 to 1035, and a deep Atlantic depression can fall below 950. Isobars on a synoptic chart are drawn at four-hectopascal intervals, so the spacing of the lines is a direct picture of how hard the wind will blow.

Storm intensity is reported the same way. The central pressure of a tropical cyclone is the single most quoted measure of its strength, and the lowest sea-level pressure ever recorded was 870 hectopascals in Typhoon Tip in 1979. A drop of a few tens of hectopascals over a day is enough to turn ordinary weather into a severe event.

Altitude changes the reading steadily. Near sea level pressure falls by roughly one hectopascal for every eight metres of height gained, which is why a barometric altimeter works at all and why a barometer at home responds to being carried upstairs. That gradient weakens with altitude, so the relationship holds only in the lowest few kilometres.

Aviation depends on the unit for safety. Pilots set their altimeters to a local pressure figure given in hectopascals so that everyone in the same airspace measures height from the same datum, and above a defined transition altitude all aircraft switch to the standard setting of 1013 hectopascals so that vertical separation is preserved regardless of the weather. North American practice uses inches of mercury for the same purpose, and the two must never be confused.

For conversion, one hectopascal is one millibar exactly, 0.1 kilopascals, and about 0.0295 inches of mercury. The last of those is the figure to watch, since a reading of 30 inches of mercury and one of 1016 hectopascals describe the same afternoon.

One hectopascal equals 100 pascals, 1 millibar, 0.1 kilopascals, or about 0.0295 inches of mercury.

Information about the Pascal (Pa)

The pascal is the SI unit of pressure, written Pa. It is defined as one newton of force spread over one square metre, and it is named after Blaise Pascal, whose experiments with barometers in the 1640s established that air has weight and that its pressure falls with altitude. The General Conference on Weights and Measures adopted the name in 1971.

It is a remarkably small unit. Atmospheric pressure at sea level is 101,325 pascals, so the pressure everyone lives under is a six-figure number, and almost every practical use of the unit therefore carries a prefix. That awkwardness is not a design fault but a consequence of coherence: the newton and the square metre were fixed first, and the pascal is whatever falls out of dividing one by the other.

Acoustics is the field where bare pascals are natural. The reference pressure for the decibel scale is twenty micropascals, taken as the quietest sound a healthy young ear can detect, and ordinary conversation is around 0.02 pascals of sound pressure. The threshold of pain sits near 63 pascals, so the entire range of human hearing spans about six orders of magnitude in this unit.

Everyday objects give a sense of the scale. A sheet of office paper lying flat presses on the desk with about 0.8 pascals. A gentle breeze exerts a few pascals on a wall, and the pressure difference that drives ventilation through a building is typically between ten and fifty. Anything a person can feel as force is already in the thousands.

Prefixed forms carry the real work. Weather uses hectopascals, which are numerically identical to the older millibars, so a forecast reading of 1013 needed no relearning. Engineering uses kilopascals for tyre and fluid pressures, and materials science uses megapascals and gigapascals for strength and stiffness, where one megapascal is one newton per square millimetre.

The pascal also appears wherever a stress rather than a pressure is meant, since the two have the same dimensions. Young's modulus, yield strength and shear stress are all quoted in pascals or their multiples, which is why a single unit spans the pressure in a tyre and the stiffness of steel.

One pascal equals 1 newton per square metre, 0.01 millibars, about 0.0000099 atmospheres, or about 0.000145 pounds per square inch.