Conversion from Gibibits per second to Gigabits per second

Information about the Gibibit per second (Gibit/s)

The gibibit per second is a unit of data transfer rate equal to 1,073,741,824 bits per second. Its symbol is Gibit/s. It is the binary counterpart of the gigabit per second, and the two now differ by 7.4 per cent, which is enough to matter in any engineering specification.

The unit belongs to the inside of a machine rather than to the network. Memory buses, processor interconnects and the links between chips on the same board all move a power-of-two number of bits per clock cycle, so their throughput is naturally expressed with a binary prefix. A bus sixty-four bits wide clocked at a given frequency delivers a rate that is a binary multiple of that frequency.

Networking, by contrast, is decimal all the way down. Gigabit Ethernet carries exactly one thousand million bits per second, not 1,073,741,824, and the symbol rate on the wire is chosen to make that so. Confusing the two overstates a link's capacity by seven per cent, which in a capacity plan is the difference between adequate and insufficient.

In octets a gibibit per second is 134,217,728, or 128 mebioctets per second. That is close to the throughput of a fast mechanical hard drive and well below a modern solid-state drive, so it sits at the point where storage and internal buses meet and where matching their rates becomes a design question.

Benchmark tools are the commonest place to see the unit written correctly. A memory bandwidth test that allocates buffers in powers of two and measures how long they take to traverse naturally reports in gibibits or gibioctets per second, and a well-written tool says so explicitly rather than rounding to the decimal unit.

The reason to insist on the distinction here rather than lower down the scale is arithmetic. At the kibibit the gap was 2.4 per cent and could be ignored; here it is nearly a thirteenth, and it grows by a further 2.4 per cent at every step above. Getting into the habit at this level costs nothing and avoids compounding errors later.

One gibibit per second equals 1,073,741,824 bits per second, 134,217,728 octets per second, or about 1.074 gigabits per second.

Information about the Gigabit per second (Gbit/s)

The gigabit per second is a unit of data transfer rate equal to one thousand million bits per second. Its symbol is Gbit/s, often written Gbps. It names the standard of wired local networking and, increasingly, of domestic fibre connections.

Gigabit Ethernet was standardised in 1998 for optical fibre and in 1999 for ordinary twisted-pair copper, and the copper version is what made it universal. It runs a hundred metres over the same cabling that carried the hundred-megabit standard before it, which meant buildings could be upgraded by replacing equipment rather than wiring. That single property fixed the gigabit as the default connection for a generation.

In octets a gigabit per second is 125 megaoctets per second. That is roughly the speed of a good mechanical hard drive and well below a modern solid-state drive, which is why gigabit networking is no longer the bottleneck it once was: the network can now outrun the storage at one end or the other in many common setups.

Domestic fibre services advertise a gigabit routinely, and the figure has become a marketing threshold more than a technical one. Practically no household can saturate it — a gigabit is enough for around two hundred simultaneous high-definition video streams — and the benefit in daily use is not throughput but the absence of congestion, which keeps latency low and steady.

Above the gigabit the ladder continues in the same steps. Ten-gigabit Ethernet is standard between servers and switches in data centres; twenty-five, forty, hundred and four-hundred-gigabit links join racks, buildings and cities. Each is a multiple of the same unit, and each is still counted in bits per second because that is what the optics and the copper actually carry.

Wireless has followed. The later wireless local network standards quote peak rates above a gigabit per second, though those figures assume a single device, ideal conditions and the full width of the channel. Real wireless throughput in a normal home is typically a third to a half of the advertised peak, and the gap widens with every additional device.

One gigabit per second equals 1,000,000,000 bits per second, 125 megaoctets per second, or about 0.9313 gibibits per second.