| Furlongs (fur) | Millimeters (mm) |
|---|---|
| 1 Furlong | 201168 mm |
| 2 Furlongs | 402336 mm |
| 3 Furlongs | 603504 mm |
| 4 Furlongs | 804672 mm |
| 5 Furlongs | 1005840 mm |
| 10 Furlongs | 2011680 mm |
| 20 Furlongs | 4023360 mm |
| 25 Furlongs | 5029200 mm |
| 50 Furlongs | 10058400 mm |
| 100 Furlongs | 20116800 mm |
| Reference | Furlongs (fur) | Millimeters (mm) |
|---|---|---|
| A sheet of A4 paper (long side) | 0.00147638 fur | 297 mm |
| Average adult human height | 0.00845065 fur | 1700 mm |
| A football pitch (length) | 0.521952 fur | 105000 mm |
| A marathon | 209.75 fur | 42195000 mm |
| Height of Mount Everest | 43.9881 fur | 8849000 mm |
The furlong is a unit of length equal to 220 yards, 660 feet, or exactly 201.168 metres. It is one eighth of a mile and ten chains.
The name is a contraction of the Old English furh lang, meaning furrow long, and describes the distance a team of oxen could plough before needing rest. That practical origin fixed the length of a medieval strip field, and the furlong therefore predates the mile's English definition. When the Roman mile of 5000 feet was reconciled with English land measurement, the mile was lengthened to 5280 feet so that it would contain a whole number of furlongs. The awkward figure that generations of schoolchildren have memorised is a direct consequence of preserving the older agricultural unit.
Horse racing is where the furlong remains in active daily use. Race distances in Britain, Ireland, the United States and much of the racing world are stated in miles and furlongs, so a race described as one mile two furlongs covers 2010 metres. Sectional times are recorded furlong by furlong, and commentary is built around the unit. Distance markers along the rail count down the remaining furlongs to the finish.
The furlong's relationship to area explains its persistence in older records. An acre was originally defined as one furlong long by one chain wide, the area a team could plough in a day. This is why an acre is a long thin rectangle rather than a square, and why its modern value of 43,560 square feet looks arbitrary.
Outside racing the unit is largely archaic, though it appears in some historical land deeds and in the occasional legal description. Computing folklore keeps it alive in the furlong per fortnight, a deliberately absurd unit of speed used to make a point about dimensional analysis.
It is the reason the acre has the shape it does. An acre was defined as one furlong long by one chain wide, 220 yards by 22, and that long thin rectangle is exactly what a team of oxen could plough in a day without turning more often than necessary. The proportion of ten to one is preserved in the ridge and furrow patterns still visible from the air across the English Midlands, and in field boundaries that have outlasted every plough that made them. The furlong therefore survives less as a measurement than as a shape written into the landscape.
One furlong equals 220 yards, 10 chains, one eighth of a mile, or 201.168 metres.
The millimetre is one thousandth of a metre, written mm. It is the smallest division marked on most rulers and tape measures, which makes it the practical floor of everyday measurement in countries using the metric system.
Technical drawing has settled on the millimetre almost universally. Mechanical engineering drawings state dimensions in millimetres by default, usually without writing the unit at all, because the convention is understood. This avoids the decimal points that centimetres would introduce and the large numbers that micrometres would require. A component 45.5 mm long is easier to read and harder to misinterpret than one 4.55 cm or 45500 µm long.
Meteorology uses the millimetre for rainfall. A reading of 25 mm means that rain would stand 25 millimetres deep on a flat surface that did not drain, which corresponds to 25 litres per square metre. Snowfall is usually reported as depth in centimetres and separately as liquid water equivalent in millimetres.
Medicine relies on the unit for tumour dimensions, wound measurement and the size of anatomical structures on imaging. Ophthalmic prescriptions specify pupillary distance in millimetres. Blood pressure retains the older unit of millimetres of mercury, a pressure measurement whose name preserves the height of a mercury column.
Paper, sheet metal and glass are specified by thickness in millimetres. A standard sheet of office paper is about 0.1 mm thick. Domestic window glass is commonly 4 mm. Firearm and ammunition calibres are frequently given in millimetres, as in 9 mm.
Fastener sizes follow the unit closely. Metric bolts and screws are designated by their nominal diameter in millimetres, so an M8 bolt has an eight-millimetre thread. Spanner and socket sizes are marked the same way, measuring across the flats of the fastener head. This is why a metric toolkit contains an unbroken run of sizes rather than the fractional inch steps of an imperial set.
Medicine measures pressure with it as well as distance. Blood pressure is reported in millimetres of mercury, the height of a mercury column the pressure would support, so a healthy reading of 120 over 80 refers to two lengths rather than to any force directly. The convention dates from the mercury manometer and has survived every instrument that replaced it, because the numbers are familiar to every clinician alive. The same unit measures intraocular pressure in the eye, central venous pressure and the partial pressures of gases in blood, and it appears in vacuum work as the torr, which is one millimetre of mercury under another name.
One millimetre equals 1000 micrometres, 0.1 centimetres, or 0.001 metres. It is roughly 0.03937 inches, so 25.4 millimetres make exactly one inch.