Conversion from Ares to Square nautical miles

Information about the Are (a)

The are is a unit of area equal to one hundred square metres, written a. It is a square ten metres on a side. It was created by the French metric legislation of 1795 as the basic decimal unit of land, taking its name from the Latin word for a level open space, and it is the parent of the hectare that eventually overshadowed it.

The original scheme was tidy. The are would measure a garden or a plot, the hectare a field, and the centiare a single square metre, giving three decimal steps that covered everything from a doorway to a farm. In practice the middle rung carried almost all the weight: fields were described in hectares and buildings in square metres, and the are was left with the narrow band between.

It nevertheless survives in land registration, and there it is entirely alive. French, Belgian and Luxembourgish deeds record parcels as hectares, ares and centiares in three columns, so a plot might be written as 1 ha 25 a 30 ca, meaning 12,530 square metres. In Poland the ar is the ordinary way of describing a building plot, and in Indonesia and parts of central Europe it fills the same role.

For scale, one are is a square ten metres on a side: a generous garden, a small yard, or the footprint of a modest house with a little room to spare. A badminton court is a little over eight tenths of an are, a single-car garage about one fifth, and a tennis court about two and a half. It is the largest unit that still describes something a person can pace out in a few seconds.

In strict SI terms the are is exactly the square decametre, since a decametre is ten metres. The two are the same quantity written two ways, and the SI form is essentially never used, which makes the are one of the few cases where the older unit is the readable one.

Its main practical trap is the symbol. A single lower-case a is easily lost in running text or mistaken for an abbreviation, which is why deeds usually write it in a fixed column and why anything ambiguous is safer converted to square metres before it is passed on.

One are equals 100 square metres, 0.01 hectares, or about 1076.4 square feet.

Information about the Square nautical mile (sq nmi)

The square nautical mile is a unit of area equal to 3,429,904 square metres, or about 3.43 square kilometres. Its symbol is sq nmi. It is the area of a square one nautical mile on a side, the nautical mile being defined as exactly 1852 metres. It is the working unit of everything that happens at sea and is measured across a surface rather than along a line.

Its usefulness comes from the definition of the nautical mile itself. One nautical mile is very nearly one minute of latitude, so a square nautical mile is close to a one-minute cell on a chart. That makes it the natural grid square for anything plotted on a nautical chart, because the unit and the graticule agree without any conversion, and a navigator can read distance and area off the same scale.

Maritime law is written in nautical miles and therefore accounted in square ones. Under the international law of the sea, a coastal state has a territorial sea of twelve nautical miles, a contiguous zone of twenty-four and an exclusive economic zone reaching two hundred. The resulting areas are vast: a state with scattered island possessions can control several million square kilometres of ocean, and comparisons between such claims are usually made after converting these figures to metric.

Search and rescue planning depends on the unit directly. A search area is defined in square nautical miles, and the time to cover it follows from the search vessel's speed in knots and the sweep width of its sensors, both of which are already in nautical units. Keeping the whole calculation in one system is what allows a coordinator to estimate coverage without stopping to convert anything.

Fisheries science and naval operations use it the same way. Fish stock density is reported per square nautical mile, survey transects are spaced in nautical miles, exercise and restricted areas are drawn as blocks of them, and aviation control zones over water are described in the same terms because aircraft also navigate in knots.

For conversion, one square nautical mile is 3.43 square kilometres, 1.32 square statute miles, or about 848 acres. The ratio to the statute mile is not intuitive, since the nautical mile is only about 15 per cent longer but the square is a third larger, which is the usual consequence of squaring a length ratio.

One square nautical mile equals 3,429,904 square metres, about 3.43 square kilometres, about 1.32 square miles, or about 848 acres.