Conversion from 50 Square nautical miles to Square hands

=

Invert

Formula to convert Square nautical miles (sq nmi) to Square hands (sq hh)

More information

Square nautical miles to Square hands conversion table

Square nautical miles (sq nmi)Square hands (sq hh)
1 Square nautical mile332272614.545 sq hh
2 Square nautical miles664545229.09 sq hh
3 Square nautical miles996817843.636 sq hh
4 Square nautical miles1329090458.18 sq hh
5 Square nautical miles1661363072.73 sq hh
10 Square nautical miles3322726145.45 sq hh
20 Square nautical miles6645452290.9 sq hh
25 Square nautical miles8306815363.63 sq hh
50 Square nautical miles16613630727.3 sq hh
100 Square nautical miles33227261454.5 sq hh

Area reference points

ReferenceSquare nautical miles (sq nmi)Square hands (sq hh)
A sheet of A4 paper0.0000000181842 sq nmi6.04211 sq hh
A tennis court0.0000760371 sq nmi25265.1 sq hh
A football pitch0.00208169 sq nmi691689 sq hh
One hectare0.00291553 sq nmi968752 sq hh
Central Park, New York0.994197 sq nmi330344411 sq hh

Try our other unit converters

LengthMassTemperatureEnergyVolumeSpeedTimeDataPressureFrequencyData-transfer rateVolumetric flow rateAngleArea

Information about the Square nautical mile (sq nmi)

The square nautical mile is a unit of area equal to 3,429,904 square metres, or about 3.43 square kilometres. Its symbol is sq nmi. It is the area of a square one nautical mile on a side, the nautical mile being defined as exactly 1852 metres. It is the working unit of everything that happens at sea and is measured across a surface rather than along a line.

Its usefulness comes from the definition of the nautical mile itself. One nautical mile is very nearly one minute of latitude, so a square nautical mile is close to a one-minute cell on a chart. That makes it the natural grid square for anything plotted on a nautical chart, because the unit and the graticule agree without any conversion, and a navigator can read distance and area off the same scale.

Maritime law is written in nautical miles and therefore accounted in square ones. Under the international law of the sea, a coastal state has a territorial sea of twelve nautical miles, a contiguous zone of twenty-four and an exclusive economic zone reaching two hundred. The resulting areas are vast: a state with scattered island possessions can control several million square kilometres of ocean, and comparisons between such claims are usually made after converting these figures to metric.

Search and rescue planning depends on the unit directly. A search area is defined in square nautical miles, and the time to cover it follows from the search vessel's speed in knots and the sweep width of its sensors, both of which are already in nautical units. Keeping the whole calculation in one system is what allows a coordinator to estimate coverage without stopping to convert anything.

Fisheries science and naval operations use it the same way. Fish stock density is reported per square nautical mile, survey transects are spaced in nautical miles, exercise and restricted areas are drawn as blocks of them, and aviation control zones over water are described in the same terms because aircraft also navigate in knots.

For conversion, one square nautical mile is 3.43 square kilometres, 1.32 square statute miles, or about 848 acres. The ratio to the statute mile is not intuitive, since the nautical mile is only about 15 per cent longer but the square is a third larger, which is the usual consequence of squaring a length ratio.

One square nautical mile equals 3,429,904 square metres, about 3.43 square kilometres, about 1.32 square miles, or about 848 acres.


Information about the Square hand (sq hh)

The square hand is a unit of area equal to sixteen square inches, or 103.2256 square centimetres. Its symbol is sq hh. A hand is four inches, so a square hand is a square four inches on a side, roughly the area of an adult palm. It is a complete and consistent unit that almost nobody has ever needed, because the hand it derives from measures one thing only.

That one thing is horses. The height of a horse or pony is measured at the withers, the ridge between the shoulder blades, and it is given in hands almost everywhere in the world, including in countries that are otherwise entirely metric. A hand was fixed at four inches by an English statute of 1541 under Henry VIII, and the equestrian world has held to that figure ever since.

The notation contains a trap worth knowing. A horse described as 15.2 hands is not fifteen and two tenths but fifteen hands and two inches, which is 62 inches or 157.5 centimetres. The digit after the point runs from 0 to 3 and then rolls over, so 15.3 is followed by 16.0. Anyone converting a list of horse heights with ordinary decimal arithmetic will produce numbers that are wrong by up to three inches.

Where the boundary between pony and horse falls is decided by this measurement. Most classifications put it at 14.2 hands, which is 58 inches or 147.3 centimetres, and competition classes at every level are drawn on the same scale. Because a placing can depend on a fraction of an inch, official measurement is a regulated procedure carried out on a level surface by an approved measurer.

The area form has never followed the length into use. Body-derived units were invented for laying along things, the height of an animal, the length of a cloth, the depth of water, and not for enclosing ground, which is why the acre and the chain came from ploughing rather than from anatomy. A square hand is simply what appears when the rule for forming areas is applied to a unit that had no such purpose.

As a quantity it is easy enough to place. A hundred square centimetres is a large sticky note, a beer mat and a half, or the palm of a hand, which is the same comparison used to estimate burn area in first aid. Sixteen square hands make a square foot, and 2304 of them make a square yard.

One square hand equals 16 square inches, about 103.23 square centimetres, or about 0.0103 square metres.